Optimization of the Slag Conditions in a Ladle Furnace

被引：2

作者：

Metelkin, A. A. ^{[1
]}

Sheshukov, O. Yu ^{[2
,3
]}

Saveliev, M., V ^{[4
]}

Shevchenko, O., I ^{[1
]}

Egiazaryan, D. K. ^{[2
,3
]}

Nekrasov, I., V ^{[2
]}

Tkachev, A. S. ^{[4
]}

Elin, V. Yu ^{[4
]}

机构：

[1] Ural Fed Univ, Nizhny Tagil Technol Inst, Nizhny Tagil, Russia

[2] Ural Fed Univ, Ekaterinburg, Russia

[3] Russian Acad Sci, Inst Met, Ural Branch, Ekaterinburg, Russia

[4] AO Nizhny Tagil Met Plant EVRAZ NTMK, Nizhny Tagil, Russia

来源：

METALLURGIST | 2022年 / 66卷 / 5-6期

关键词：

ladle furnace; MgO contents; rational composition of slag;

D O I：

10.1007/s11015-022-01371-6

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The MgO content in ladle slags is addressed. It is important to tend to, but not to exceed the MgO saturation limit during slag induction. Exceeding this limit will have an adverse effect on the refining properties of slag. The heating temperature of the slag and metal in a ladle furnace is studied. It is shown that the MgO saturation limit varies during steel processing. Taking this variation into account allows adjusting the target content of this oxide when calculating the amount of injected MgO-containing materials, ensuring low corrosivity of homogeneous slag to the lining, while maintaining its refining properties.

引用

页码：646 / 649

页数：4

共 50 条

[21] Effect of granulometry on cementitious properties of ladle furnace slag
Papayianni, Ioanna
Anastasiou, Eleftherios
CEMENT & CONCRETE COMPOSITES, 2012, 34 (03): : 400 - 407
[22] EFFECTIVE UTILIZATION OF BOF SLAG FOR LADLE REFINING FURNACE
FURUNO, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1101 - 1101
[23] A way to reduce environmental impact of ladle furnace slag
Branca, T. A.
Colla, V.
Valentini, R.
IRONMAKING & STEELMAKING, 2009, 36 (08) : 597 - 602
[24] Ladle Furnace Slag in the Construction of Embankments: Expansive Behavior
Montenegro, J. M.
Celemin-Matachana, M.
Canizal, J.
Setien, J.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2013, 25 (08) : 972 - 979
[25] Formation of optimal slag composition in ladle furnace for improvement of desulfurization properties and optimization of consumption of slag-forming materials
Metelkin, A. A.
Sheshukov, O. Yu.
Saveliev, M. V.
Egiazaryan, D. K.
Tkachev, A. S.
Elin, V. Yu.
METALLURGIST, 2024, 68 (07) : 970 - 975
[26] Application of Ladle Furnace Slag on Strength Development of Expansive Clay Under Variable Moisture Conditions
Islam, Mohammed Russedul
Tanvir, Abu Sadat Mohammad
Islam, Naveel
Alam, Md. Kausar
Rahman, Md. Aftabur
Dey, Rajib
TRANSPORTATION INFRASTRUCTURE GEOTECHNOLOGY, 2025, 12 (01)
[27] Stabilization and Crystal Characterization of Electric Arc Furnace Oxidizing Slag Modified with Ladle Furnace Slag and Alumina
Li, Chia-Chun
Lin, Chi-Ming
Chang, Yu-En
Chang, Wei-Ti
Wu, Weite
METALS, 2020, 10 (04)
[28] Elimination of Fluorspar Use and Reduction in Lime Consumption at Ladle Furnace by Reutilizing Alumina-Rich Ladle Furnace Slag
Sidhartha Sarkar
Vijay Anand
Rajeev Ranjan
Chenna Rao Borra
P. P. Sahoo
Journal of Sustainable Metallurgy, 2022, 8 : 398 - 408
[29] Elimination of Fluorspar Use and Reduction in Lime Consumption at Ladle Furnace by Reutilizing Alumina-Rich Ladle Furnace Slag
Sarkar, Sidhartha
Anand, Vijay
Ranjan, Rajeev
Borra, Chenna Rao
Sahoo, P. P.
JOURNAL OF SUSTAINABLE METALLURGY, 2022, 8 (01) : 398 - 408
[30] A Review on Stabilization of Ladle Furnace Slag-Powdering Issue
Abinash Dash
Prasenjit Chanda
P. K. Tripathy
Nikhil Kumar
Journal of Sustainable Metallurgy, 2022, 8 : 1435 - 1449

← 1 2 3 4 5 →