Research on carbon fiber/epoxy interfacial bonding characterization of transverse fiber bundle composites fabricated by different preparation processes: Effect of fiber volume fraction

被引：30
作者：
Qi, Guocheng [1 ]
Zhang, Boming [1 ]
Yu, Yalin [1 ]
机构：
[1] Beihang Univ, Sch Mat Sci & Engn, Beijing 100191, Peoples R China
来源：
POLYMER TESTING | 2016年 / 52卷
关键词：
Carbon fiber; Fiber/matrix bond; Finite element analysis (FEA); Micro-mechanics; Fiber volume fraction; EPOXY MATRIX; SHEAR-STRENGTH;
D O I：
10.1016/j.polymertesting.2016.03.022
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The transverse fiber bundle (TFB) test has recently been implemented to evaluate carbon fiber/epoxy bonding strength. Due to limitations of the specimen manufacturing process, the fiber volume fraction has a particular significant influence on the TFB test results. TFB specimens with different fiber volume contents were prepared by different fiber impregnation processes. A multiscale model with different fiber volume contents was established to simulate the damage process. Both experimental and analytical results show that TFB bonding strength increases with decrease of fiber volume content. Hence, the fiber volume fraction effect should be considered when using the TFB test as a characteristic of interfacial strength. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：150 / 156
页数：7
相关论文
共 15 条
[1]   Assessment of interfacial bonding between polymer threads and epoxy resin by transverse fibre bundle (TFB) tests [J].
Deng, Shiqiang ;
Qi, Ben ;
Hou, Meng ;
Ye, Lin ;
Magniez, Kevin .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (11) :1698-1707
[2]   Strengthening fibre/matrix interphase by fibre surface modification and nanoparticle incorporation into the matrix [J].
Drescher, P. ;
Thomas, M. ;
Borris, J. ;
Riedel, U. ;
Arlt, C. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2013, 74 :60-66
[3]   Enhanced cryogenic interfacial normal bond property between carbon fibers and epoxy matrix by carbon nanotubes [J].
Feng, Qing-Ping ;
Deng, Yin-Hu ;
Xiao, Hong-Mei ;
Liu, Yu ;
Qu, Cheng-Bing ;
Zhao, Yang ;
Fu, Shao-Yun .
COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 104 :59-65
[4]   Improved bonding between PAN-based carbon fibers and fullerene-modified epoxy matrix [J].
Jiang, Zhenyu ;
Zhang, Hui ;
Zhang, Zhong ;
Murayama, Hideki ;
Okamoto, Keiji .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (11) :1762-1767
[5]   Effects of cure cycles on void content and mechanical properties of composite laminates [J].
Liu, L ;
Zhang, BM ;
Wang, DF ;
Wu, ZJ .
COMPOSITE STRUCTURES, 2006, 73 (03) :303-309
[6]   An efficient implementation of the generalized method of cells for unidirectional, multi-phased composites with complex microstructures [J].
Pindera, MJ ;
Bednarcyk, BA .
COMPOSITES PART B-ENGINEERING, 1999, 30 (01) :87-105
[7]   Evaluation of carbon fiber/epoxy interfacial strength in transverse fiber bundle composite: Experiment and multiscale failure modeling [J].
Qi, Guocheng ;
Du, Shanyi ;
Zhang, Boming ;
Tang, Zhanwen ;
Yu, Yalin .
COMPOSITES SCIENCE AND TECHNOLOGY, 2014, 105 :1-8
[8]   Investigation of the influence of acidic and basic surface groups on carbon fibres on the interfacial shear strength in an epoxy matrix by means of single-fibre pull-out test [J].
Ramanathan, T ;
Bismarck, A ;
Schulz, E ;
Subramanian, K .
COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (04) :599-605
[9]   Failure response of fiber-epoxy unidirectional laminate under transverse tensile/compressive loading using finite-volume micromechanics [J].
Tang, Zhanwen ;
Wang, Changchun ;
Yu, Yalin .
COMPOSITES PART B-ENGINEERING, 2015, 79 :331-341
[10]   An improved microbond test method for determination of the interfacial shear strength between carbon fibers and epoxy resin [J].
Wang, Hao ;
Wang, Hankun ;
Li, Wanju ;
Ren, Dan ;
Yu, Yan .
POLYMER TESTING, 2013, 32 (08) :1460-1465
12