Effect of the Rare Earth Element Yttrium on the Structure and Properties of Boron-Containing High-Entropy Alloy

被引：38

作者：

Li, G. R. ^{[1
]}

Liu, M. ^{[1
]}

Wang, H. M. ^{[1
]}

Zhang, D. ^{[1
]}

Tang, F. ^{[1
]}

Wang, C. W. ^{[1
]}

Zhao, Y. T. ^{[1
]}

Chen, G. ^{[1
]}

Kai, X. Z. ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China

来源：

JOM | 2020年 / 72卷 / 06期

关键词：

BULK METALLIC GLASSES; MECHANICAL-PROPERTIES; MICROSTRUCTURE;

D O I：

10.1007/s11837-020-04059-x

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effects of rare earth yttrium with 0.1, 0.2 and 0.5 atomic ratios on the microstructure and properties of FeCoNi1.5CuB high-entropy alloy were investigated. The results show that the lattice distortion of the matrix alloy is increased after yttrium addition. There are three characteristic zones: the bulk trivalent boride phase zone, basement zone and yttrium-rich precipitate zone. When the yttrium atom ratio is > 0.2, the nanoscale YB6 particles disperse uniformly in the yttrium-rich zone, which can improve the strength of the alloy. As for the mechanical properties, the FeCoNi1.5CuBY0.2 alloy has the highest strength. The corresponding compressive strength, yield strength and maximum compression ratio have been increased by 19.9%, 75.4% and 37%, respectively, compared with those of FeCoNi1.5CuB alloy. This is attributed to the solid solution, grain refinement and dispersion strengthening in the presence of yttrium addition.

引用

页码：2332 / 2339

页数：8

共 21 条

[11] Microwave assisted synthesis of Si-modified Mn25FexNi25Cu(50-x) high entropy alloys [J].

Veronesi, Paolo ;

Colombini, Elena ;

Rosa, Roberto ;

Leonelli, Cristina ;

Rosi, Fabrizio .

MATERIALS LETTERS, 2016, 162 :277-280

[12] Mechanical response and deformation behavior of Al0.6CoCrFeNi high-entropy alloys upon dynamic loading [J].

Wang, L. ;

Qiao, J. W. ;

Ma, S. G. ;

Jiao, Z. M. ;

Zhang, T. W. ;

Chen, G. ;

Zhao, D. ;

Zhang, Y. ;

Wang, Z. H. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 727 :208-213

[13] Effect of Ni/Cr ratio on phase, microstructure and mechanical properties of NixCoCuFeCr2-x (x=1.0, 1.2, 1.5, 1.8 mol) high entropy alloys [J].

Wang, Pei ;

Cai, Hongnian ;

Cheng, Xingwang .

JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 662 :20-31

[14] Electromagnetic wave absorption properties of FeCoNiCrAl0.8 high entropy alloy powders and its amorphous structure prepared by high-energy ball milling [J].

Yang, Peipei ;

Liu, Ying ;

Zhao, Xiuchen ;

Cheng, Jingwei ;

Li, Hong .

JOURNAL OF MATERIALS RESEARCH, 2016, 31 (16) :2398-2406

[15] Enhanced cyclability of elastocaloric effect in boron-microalloyed Ni-Mn-In magnetic shape memory alloys [J].

Yang, Z. ;

Cong, D. Y. ;

Sun, X. M. ;

Nie, Z. H. ;

Wang, Y. D. .

ACTA MATERIALIA, 2017, 127 :33-42

[16] Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes [J].

Yeh, JW ;

Chen, SK ;

Lin, SJ ;

Gan, JY ;

Chin, TS ;

Shun, TT ;

Tsau, CH ;

Chang, SY .

ADVANCED ENGINEERING MATERIALS, 2004, 6 (05) :299-303

[17] Effect of Al content on structure and mechanical properties of the AlxCrNbTiVZr (x=0; 0.25; 0.5; 1) high-entropy alloys [J].

Yurchenko, N. Yu. ;

Stepanov, N. D. ;

Shaysultanov, D. G. ;

Tikhonovsky, M. A. ;

Salishchev, G. A. .

MATERIALS CHARACTERIZATION, 2016, 121 :125-134

[18] Low-Rank and Joint Sparse Representations for Multi-Modal Recognition [J].

Zhang, Heng ;

Patel, Vishal M. ;

Chellappa, Rama .

IEEE TRANSACTIONS ON IMAGE PROCESSING, 2017, 26 (10) :4741-4752

[19] Synthesis and characterization of FeCoNiCrCu high-entropy alloy coating by laser cladding [J].

Zhang, Hui ;

Pan, Ye ;

He, Yi-Zhu .

MATERIALS & DESIGN, 2011, 32 (04) :1910-1915

[20] Effects of rare-earth element, Y, additions on the microstructure and mechanical properties of CoCrFeNi high entropy alloy [J].

Zhang, L. J. ;

Zhang, M. D. ;

Zhou, Z. ;

Fan, J. T. ;

Cui, P. ;

Yu, P. F. ;

Jing, Q. ;

Ma, M. Z. ;

Liaw, P. K. ;

Li, G. ;

Liu, R. P. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 725 :437-446

← 1 2 3 →