共 50 条
Corrosion Behavior of AlFeCrCoNiZrx High-Entropy Alloys in 0.5 M Sulfuric Acid Solution
被引:15
作者:
Yao, Yuhong
[1
]
Jin, Yaohua
[1
]
Gao, Wei
[1
]
Liang, Xiaoyu
[1
]
Chen, Jian
[1
]
Zhu, Shidong
[2
]
机构:
[1] Xian Technol Univ, Sch Mat Sci & Chem Engn, Xian 710032, Peoples R China
[2] Xian Shiyou Univ, Sch Mat Sci & Engn, Xian 710065, Peoples R China
来源:
基金:
中国国家自然科学基金;
关键词:
high-entropy alloys;
zirconium;
potentiodynamic polarization;
corrosion rate;
microstructure;
MECHANICAL-PROPERTIES;
MICROSTRUCTURE;
ZR;
304-STAINLESS-STEEL;
STABILITY;
EVOLUTION;
COATINGS;
D O I:
10.3390/met11091471
中图分类号:
T [工业技术];
学科分类号:
08 ;
摘要:
AlCoCrFeNiZrx (x = 0, 0.1, 0.2, 0.3, and 0.5) high-entropy alloys (HEAs) were prepared by a non-consumable vacuum arc melting technology, and the microstructure and corrosion behavior were investigated by XRD, SEM, immersion tests, and electrochemical measurements. The results indicate that galvanic corrosion of the AlCoCrFeNiZrx alloys occurred in 0.5 M H2SO4 solution, and only 0.1 mol of the added Zr could greatly improve the corrosion resistance of the alloys. The corrosion properties of the AlCoCrFeNiZrx HEAs had similar change tendencies with the increase in the Zr content in the immersion tests, potentiodynamic polarization measurements, and electrochemical impedance analysis, that is, the corrosion resistance of the AlCoCrFeNiZrx alloys in a 0.5 M H2SO4 solution first increased and then decreased with the increase in the Zr content. The Zr0.1 alloys were found to have the best selective corrosion and general corrosion resistance with the smallest corrosion rate, whereas the Zr0.3 alloys presented the worst selective corrosion and general corrosion resistance with the highest corrosion rate from both the immersion tests and the potentiodynamic polarization measurements.
引用
收藏
页数:15
相关论文
共 50 条