Calibrated simulation for estimating energy savings by the use of cool roof in five Indian climatic zones

被引:32
作者
Bhatia, Aviruch [1 ]
Mathur, Jyotirmay [1 ]
Garg, Vishal [2 ]
机构
[1] Malaviya Natl Inst Technol, Dept Mech Engn, Jaipur 302017, Rajasthan, India
[2] Int Inst Informat Technol, Ctr IT Bldg Sci, Hyderabad 500032, Andhra Pradesh, India
关键词
BUILDING ENERGY; PERFORMANCE;
D O I
10.1063/1.3582768
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
A calibrated model has been used to estimate the energy savings by cool roof application on buildings located in five different climatic zones. The model has been calibrated as per the measured data in a building located in Hyderabad (India), and the same has been used to project energy savings in different cities located in five different climatic zones of the country. Results show that the maximum reduction in energy consumption is observed in Mumbai (warm and humid climate), followed by Ahmedabad (hot and dry climate), Bangalore (temperate climate), and Delhi (composite climate). Least energy saving is observed in Shillong (cold climate). In all the climates except cold, the financial payback period is acceptable, being less than 3 yr, whereas for cold climate, the investment is getting paid back in 6.69 yr, making the cool roof application not very attractive. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3582768]
引用
收藏
页数:14
相关论文
共 17 条
  • [1] Monitoring the energy-use effects of cool roofs on California commercial buildings
    Akbari, H
    Levinson, R
    Rainer, L
    [J]. ENERGY AND BUILDINGS, 2005, 37 (10) : 1007 - 1016
  • [2] [Anonymous], 142002 ASHRAE
  • [3] BANSAL NK, 1995, SCI SERIES INT BUREA
  • [4] Chimack M. J., 2001, P 7 INT IBPSA C, P191
  • [5] DOE: Federal Energy Management Program, 2008, M V GUID MEAS VER FE
  • [6] Procedures for calibrating hourly simulation models to measured building energy and environmental data
    Haberl, JS
    Bou-Saada, TE
    [J]. JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 1998, 120 (03): : 193 - 204
  • [7] Hildebrandt E., 1998, ASHRAE TECHNICAL DAT, V14
  • [8] International Performance Measurement and Verification Protocol (IPMVP), 2007, CONC OPT DET EN WAT
  • [9] Konopacki S., 1998, LBNL40673
  • [10] Konopacki S., 1997, LBNL39433