Characterization of PA12/PBT specimens prepared by selective laser sintering

被引：29
作者：
Salmoria, G. V. [1 ]
Lauth, V. R. [1 ]
Cardenuto, M. R. [1 ]
Magnago, R. F. [1 ,2 ]
机构：
[1] Univ Fed Santa Catarina, Dept Engn Mecan, Lab CIMJECT, BR-88040900 Florianopolis, SC, Brazil
[2] Univ Sul Santa Catarina, BR-88704900 Tubarao, SC, Brazil
来源：
OPTICS AND LASER TECHNOLOGY | 2018年 / 98卷
关键词：
Polymeric specimens; PA12/PBT; Laser sintering; MECHANICAL-PROPERTIES; MICROSTRUCTURAL CHARACTERIZATION; REACTIVE COMPATIBILIZATION; BLEND SPECIMENS; POLYMER BLENDS; ENERGY DENSITY; PARTS; RESIN; PBT;
D O I：
10.1016/j.optlastec.2017.07.044
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
In this study the structure and properties of PA12 (Polyamide 12) and PBT (polybutylene terephthalate) blend specimens manufactured by SLS using a CO2 laser were investigated. The microstructures of PA12/PBT blend specimens were found to be dependent on the PBT content. The higher values for the flexural modulus and ultimate strength presented by 90/10 PA12/PBT specimens indicated the hardening effect of low quantities of PBT particles in the PA12 matrix, which provides higher stiffness. The visco-elastic and fatigue test result's for the PA12/PBT 90/10 blend also suggest an elastic characteristic for this blend composition. The potential application in the manufacturing of blend parts with a composition of 90/10 PA12/PBT with high stiffness and fatigue resistance using SLS was verified. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：92 / 96
页数：5
相关论文
共 50 条
  • [21] Shrinkage behaviour of semi-crystalline polymers in laser sintering: PEKK and PA12
    Benedetti, L.
    Brule, B.
    Decreamer, N.
    Evans, K. E.
    Ghita, O.
    MATERIALS & DESIGN, 2019, 181
  • [22] Investigation of the effect of laser energy density on selective laser sintering of PA12 using a multi-physics field simulation method
    Li, Mei
    Zhao, Ze
    Yang, Qiang
    Wei, Yuan
    Li, Junchao
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 129 (5-6) : 1987 - 1998
  • [23] Characterization of PA-12 specimens fabricated by projection sintering at various sintering parameters
    Kaur, Taranjot
    Nussbaum, Justin
    Lee, Sanboh
    Rodriguez, Kevin
    Crane, Nathan B.
    Harmon, Julie
    POLYMER ENGINEERING AND SCIENCE, 2021, 61 (01) : 221 - 233
  • [24] Selective laser sintering of carbon fiber-reinforced PA12: Gaussian process modeling and stochastic optimization of process variables
    Czelusniak, Tiago
    Amorim, Fred L.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (7-8) : 2049 - 2066
  • [25] Chess-like Pieces Realized by Selective Laser Sintering of PA12 Powder: 3D Printing and Micro-Tomographic Assessment
    Colucci, Giovanna
    Fontana, Luca
    Barberi, Jacopo
    Brovarone, Chiara Vitale
    Messori, Massimo
    POLYMERS, 2024, 16 (24)
  • [26] Influence of bioactive metal fillers on microstructural homogeneity of PA12 composites produced by polymer Laser Sintering
    Gruber, Piotr
    Ziolkowski, Grzegorz
    Olejarczyk, Michal
    Grochowska, Emilia
    Hoppe, Viktoria
    Szymczyk-Ziolkowska, Patrycja
    Kurzynowski, Tomasz
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2022, 22 (03)
  • [27] Monotonic loading and fatigue response of a bio-based polyamide PA11 and a petrol-based polyamide PA12 manufactured by selective laser sintering
    Salazar, A.
    Rico, A.
    Rodriguez, J.
    Segurado Escudero, J.
    Seltzer, R.
    Martin de la Escalera Cutillas, F.
    EUROPEAN POLYMER JOURNAL, 2014, 59 : 36 - 45
  • [28] Waterproof and Wear-Resistant Surface Treatment on Printed Parts of Polyamide 12 (PA12) by Selective Laser Sintering Using a Large Pulsed Electron Beam
    Kim, Jinsik
    Chun, Doo-Man
    Park, Hyung Wook
    Kim, Jisoo
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2023, 10 (01) : 71 - 83
  • [29] On the influence of inter-layer time and energy density on selected critical-to-quality properties of PA12 parts produced via laser sintering
    Pavan, M.
    Faes, M.
    Strobbe, D.
    Van Hooreweder, B.
    Craeghs, T.
    Moens, D.
    Dewulf, W.
    POLYMER TESTING, 2017, 61 : 386 - 395
  • [30] Fatigue behaviour of laser-sintered PA12 specimens under four-point rotating bending
    Munguia, Javier
    Dalgarno, Kenny
    RAPID PROTOTYPING JOURNAL, 2014, 20 (04) : 291 - 300
12345