Characterization of PA12/PBT specimens prepared by selective laser sintering

被引：29
作者：
Salmoria, G. V. [1 ]
Lauth, V. R. [1 ]
Cardenuto, M. R. [1 ]
Magnago, R. F. [1 ,2 ]
机构：
[1] Univ Fed Santa Catarina, Dept Engn Mecan, Lab CIMJECT, BR-88040900 Florianopolis, SC, Brazil
[2] Univ Sul Santa Catarina, BR-88704900 Tubarao, SC, Brazil
来源：
OPTICS AND LASER TECHNOLOGY | 2018年 / 98卷
关键词：
Polymeric specimens; PA12/PBT; Laser sintering; MECHANICAL-PROPERTIES; MICROSTRUCTURAL CHARACTERIZATION; REACTIVE COMPATIBILIZATION; BLEND SPECIMENS; POLYMER BLENDS; ENERGY DENSITY; PARTS; RESIN; PBT;
D O I：
10.1016/j.optlastec.2017.07.044
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
In this study the structure and properties of PA12 (Polyamide 12) and PBT (polybutylene terephthalate) blend specimens manufactured by SLS using a CO2 laser were investigated. The microstructures of PA12/PBT blend specimens were found to be dependent on the PBT content. The higher values for the flexural modulus and ultimate strength presented by 90/10 PA12/PBT specimens indicated the hardening effect of low quantities of PBT particles in the PA12 matrix, which provides higher stiffness. The visco-elastic and fatigue test result's for the PA12/PBT 90/10 blend also suggest an elastic characteristic for this blend composition. The potential application in the manufacturing of blend parts with a composition of 90/10 PA12/PBT with high stiffness and fatigue resistance using SLS was verified. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：92 / 96
页数：5
相关论文
共 50 条
  • [1] Mechanical properties of PA6/PA12 blend specimens prepared by selective laser sintering
    Salmoria, G. V.
    Leite, J. L.
    Vieira, L. F.
    Pires, A. T. N.
    Roesler, C. R. M.
    POLYMER TESTING, 2012, 31 (03) : 411 - 416
  • [2] Characterization of PA12/HA composite scaffolds based on selective laser sintering
    Yao, Dingrou
    Zhao, Ze
    Wu, Zhige
    Li, Mei
    Li, Junchao
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2023, 145
  • [3] Microstructural and mechanical characterization of PA12/MWCNTs nanocomposite manufactured by selective laser sintering
    Salmoria, Gean V.
    Paggi, Rodrigo A.
    Lago, Alexandre
    Beal, Valter E.
    POLYMER TESTING, 2011, 30 (06) : 611 - 615
  • [4] Processing and characterization of core-shell PA12/silica composites produced by selective laser sintering
    Wang, Jianhong
    Bai, Peikang
    Zhang, Zhenlin
    Li, Yuxin
    MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1-3, 2011, 160-162 : 756 - +
  • [5] A review of aging, degradation, and reusability of PA12 powders in selective laser sintering additive manufacturing
    Yang, Feifei
    Zobeiry, Navid
    Mamidala, Ramulu
    Chen, Xu
    MATERIALS TODAY COMMUNICATIONS, 2023, 34
  • [6] Effect of water absorption on the properties of selective laser-sintered PA12 specimens
    Villani, Vittorio
    Ponticelli, Gennaro Salvatore
    Venettacci, Simone
    Guarino, Stefano
    PROGRESS IN ADDITIVE MANUFACTURING, 2024, : 3559 - 3572
  • [7] Influence of energy density on selective laser sintering of carbon fiber-reinforced PA12
    Czelusniak, Tiago
    Amorim, Fred L.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 111 (7-8) : 2361 - 2376
  • [8] Synthesis of PA12/functionalized GNP nanocomposite powders for the selective laser sintering process
    Kim, Hyo Chan
    Hahn, H. Thomas
    Yang, Yong Sik
    JOURNAL OF COMPOSITE MATERIALS, 2013, 47 (04) : 501 - 509
  • [9] Optimization of Selective Laser Sintering Process Parameters Based on PA12 Powders for Bone Tissue Scaffolds
    Yan, Ran
    Xie, Changjiang
    Zhao, Ze
    Li, Junchao
    3D PRINTING AND ADDITIVE MANUFACTURING, 2023, 10 (05) : 1064 - 1071
  • [10] Optimum manufacturing parameters in selective laser sintering of PA12 with white cement additives
    Aldahash, Saleh Ahmed
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (1-4) : 257 - 270
12345