Parametric study for concrete cover separation failure of retrofitted SNSM strengthened RC beams

被引:5
作者
Shukri, Ahmad Azim [1 ]
Shamsudin, Mohd Fazaulnizam [2 ]
Ibrahim, Zainah [1 ]
Alengaram, U. Johnson [1 ]
机构
[1] Univ Malaya, Fac Engn, Kuala Lumpur, Malaysia
[2] Univ Nottingham, Dept Civil Engn, Nottingham, England
关键词
Near-surface mounted; numerical analysis; partial interaction; reinforced concrete; side-NSM; MOMENT-CURVATURE; NSM CFRP; BEHAVIOR; FRP; BOND; REINFORCEMENT; SIMULATION; MECHANISM; FLEXURE; STRIPS;
D O I
10.1080/15376494.2018.1482034
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The side near-surface mounted (SNSM) method is a new flexural strengthening method for reinforced concrete (RC) beams which was proposed to allow near-surface mounted (NSM) strengthening to be applied on beams with small width. As a relatively new strengthening method, further studies are needed to determine the effects of strengthening parameters on the flexural performance of RC beams. In response to that, this paper presents a parametric study on the concrete cover separation failure of SNSM strengthened beams using a simulation method based on the moment-rotation (M/theta) approach.
引用
收藏
页码:481 / 492
页数:12
相关论文
共 50 条
  • [31] Finite Element Prediction of Brittle Failure in RC Beams Strengthened with Externally Bonded FRP
    Jawdhari, Akram
    Semendary, Ali
    Hsaine, Nawfal
    2016 INTERNATIONAL CONFERENCE FOR STUDENTS ON APPLIED ENGINEERING (ICSAE), 2016, : 228 - 231
  • [32] Performance and failure analysis of carbon fiber-reinforced polymer (CFRP) strengthened reinforced concrete (RC) beams
    Siddika, Ayesha
    Saha, Krishno
    Mahmud, Md Sumodro
    Roy, Sumon Chandra
    Al Mamun, Md Abdullah
    Alyousef, Rayed
    SN APPLIED SCIENCES, 2019, 1 (12):
  • [33] FINITE ELEMENT PREDICTION OF PLATE-END COVER SEPARATION IN FRP-STRENGTHENED RC BEAMS
    Zhang, S. S.
    Teng, J. G.
    PROCEEDINGS OF THE ELEVENTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING, VOL I AND II, 2010, : 1794 - 1799
  • [34] SRG/SRP-concrete bond-slip laws for externally strengthened RC beams
    Bencardino, Francesco
    Condello, Antonio
    COMPOSITE STRUCTURES, 2015, 132 : 804 - 815
  • [35] Failure mechanism of corroded RC beams strengthened at shear and bending positions
    Yuan, Peng
    Xiao, Linfa
    Wang, Xiangjie
    Xu, Guoji
    ENGINEERING STRUCTURES, 2021, 240
  • [36] Prediction of debonding failure in FRP strengthened RC beams
    Pan, Jianwu
    Cao, Shuangyin
    ISISS 2005: Innovation & Sustainability of Structures, Vol 1-3, 2005, : 1814 - 1824
  • [37] Finite element parametric study of RC beams strengthened with carbon nanotubes modified composites
    Irshidat, Mohammad R.
    Alhusban, Rami S.
    COMPUTERS AND CONCRETE, 2021, 27 (02) : 131 - 141
  • [38] End concrete cover separation in RC structures strengthened in flexure with NSM FRP: Analytical design approach
    Rezazadeh, Mohammadali
    Barros, Joaquim A. O.
    Ramezansefat, Honeyeh
    ENGINEERING STRUCTURES, 2016, 128 : 415 - 427
  • [39] The Effect of CFRP Length on the Failure Mode of Strengthened Concrete Beams
    Ding, Jun
    Wang, Fang
    Huang, Xia
    Chen, Song
    POLYMERS, 2014, 6 (06) : 1705 - 1726
  • [40] Experimental and numerical study on the impact resistance of ultra-high performance concrete strengthened RC beams
    Wei, Jie
    Li, Jun
    Wu, Chengqing
    Hao, Hong
    Liu, Jian
    ENGINEERING STRUCTURES, 2023, 277