Authentication and Billing for Dynamic Wireless EV Charging in an Internet of Electric Vehicles

Dynamic wireless charging (DWC) is a promising technology to charge Electric Vehicles (EV) using on-road charging segments (CS), also known as DWC pads. In order to ensure effective utilization of this on-the-road charging service, communication and coordination need to be established between the EVs and the different network entities, thereby forming an Internet of Electric Vehicles (IoEV). In an IoEV, EVs can utilize different V2X communication modes to enable charging scheduling, load management, and reliable authentication and billing services. Yet, designing an authentication scheme for dynamic EV charging presents significant challenges given the mobility of the EVs and the short contact time between the EVs and the charging segments. Accordingly, this work proposes a fast, secure and lightweight authentication scheme that allows only authentic EVs with valid credentials to charge their batteries while ensuring secure and fair payments. The presented scheme starts with a key pre-distribution phase between the charging service company (CSC) and the charging pad owner (PO), followed by a hash chain and digital signature-based registration and authentication phase between the EV and the CSC, before the EV reaches the beginning of the charging lane. These preliminary authentication phases allow the authentication between the EVs and the charging segments to be performed using simple hash key verification operations prior to charging activation, which reduces the computational cost of the EVs and the CS. Symmetric and asymmetric key cryptography are utilized to secure the communication between the different network entities. Analysis of the computational and transmission time requirements of the proposed authentication scheme shows that, for an EV traveling at 60 km/h to start charging at the beginning of the charging lane, the authentication process must be initiated at least 1.35 m ahead of the starting point of the lane as it requires & SIME;81 ms to be completed.</p>