Numerical studies of methane production from Class 1 gas hydrate accumulations enhanced with carbon dioxide injection

被引:72
作者
White, M. D. [1 ]
Wurstner, S. K. [2 ]
McGrail, B. P. [3 ]
机构
[1] Pacific NW Natl Lab, Hydrol Grp, Richland, WA 99352 USA
[2] Pacific NW Natl Lab, Environm Characterizat & Risk Assessment Grp, Richland, WA 99352 USA
[3] Pacific NW Natl Lab, Appl Geol & Geochem Grp, Richland, WA 99352 USA
关键词
Gas hydrate; Mixed gas hydrate; Natural gas hydrate; Numerical simulation; Depressurization; CO2; exchange; Class 1 hydrate deposit; Class 1 hydrate accumulation; Permafrost; ALASKA NORTH SLOPE; STRATIGRAPHIC TEST WELL; PHASE-EQUILIBRIA; HYDROGEN-PRODUCTION; SYSTEM; EXPLOITATION; TEMPERATURE; PRESSURES; EQUATION; STATE;
D O I
10.1016/j.marpetgeo.2009.06.008
中图分类号
P [天文学、地球科学];
学科分类号
07 ;
摘要
Class 1 gas hydrate accumulations are characterized by a permeable hydrate-bearing interval overlying a permeable interval with mobile gas, sandwiched between two impermeable intervals. Depressurization-induced dissociation is currently the favored technology for producing gas from Class 1 gas hydrate accumulations. The depressurization production technology requires heat transfer from the surrounding environment to sustain dissociation as the temperature drops toward the hydrate equilibrium point and leaves the reservoir void of gas hydrate. Production of gas hydrate accumulations by exchanging carbon dioxide with methane in the clathrate structure has been demonstrated in laboratory experiments and proposed as a field-scale technology. The carbon dioxide exchange technology has the potential for yielding higher production rates and mechanically stabilizing the reservoir by maintaining hydrate saturations. We used numerical simulation to investigate the advantages and disadvantages of using carbon dioxide injection to enhance the production of methane from Class 1 gas hydrate accumulations. Numerical simulations in this study were primarily concerned with the mechanisms and approaches of carbon dioxide injection to investigate whether methane production could be enhanced through this approach. To avoid excessive simulation execution times, a five-spot well pattern with a 500-m well spacing was approximated using a two-dimensional domain having well boundaries on the vertical sides and impermeable boundaries on the horizontal sides. Impermeable over- and under burden were included to account for heat transfer into the production interval. Simulation results indicate that low injection pressures can be used to reduce secondary hydrate formation and that direct contact of injected carbon dioxide with the methane hydrate present in the formation is limited due to bypass through the higher permeability gas zone. Published by Elsevier Ltd.
引用
收藏
页码:546 / 560
页数:15
相关论文
共 34 条
[31]   Sensitivity of methane hydrate phase equilibria to sediment pore size [J].
Turner, DJ ;
Cherry, RS ;
Sloan, ED .
FLUID PHASE EQUILIBRIA, 2005, 228 :505-510
[32]  
White M.D., 2006, P 2 INT S GAS HYDR T
[33]  
White MD, 2000, PNNL12030
[34]  
Wilder J.W., 2008, P 6 INT C GAS HYDR I