Cutting Performance and Wear Mechanism of Si3N4-Based Nanocomposite Ceramic Tool

被引：2
|
作者：
Zou, Bin [1 ]
Huang, Chuanzhen [1 ]
Liu, Hanlian [1 ]
Song, Jinpeng [1 ]
机构：
[1] Shandong Univ, Sch Mech Engn, Ctr Adv Jet Engn Technol CaJET, Jinan 250061, Peoples R China
来源：
ADVANCES IN MATERIALS PROCESSING IX | 2010年 / 443卷
关键词：
Tool; Nanocomposite; Cutting performance; Wear mechanism; Silicon Nitride;
D O I：
10.4028/www.scientific.net/KEM.443.324
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Si3N4/TiN nanocomposite tool and Si3N4/Ti(C7N3) nanocomposite tool were prepared. The cutting performance and wear mechanism of Si3N4-based nanocomposite ceramic tool was investigated by comparison with a commercial sialon ceramic tool in machining of 45 steel. Si3N4-based nanocomposite ceramic tool exhibits the better wear resistance than sialon at the relatively high cutting speed. The increased cutting performance of Si3N4-based nanocomposite ceramic tool is ascribed to the higher mechanical properties. Nano-particles can refine the matrix grains and improve the bonding strength among the matrix grains of Si3N4-based nanocomposite ceramic tool materials. It contributes to an improved wear resistance of the cutting tools during machining.
引用
收藏
页码：324 / 329
页数：6
相关论文
共 50 条
  • [1] CUTTING PERFORMANCE AND WEAR MECHANISM OF Si3N4-BASED NANOCOMPOSITE CERAMIC CUTTING TOOL IN MACHINING OF CAST IRON
    Zou, Bin
    Huang, Chuanzhen
    Song, Jinpeng
    Liu, Hanlian
    Zhu, Hongtao
    MACHINING SCIENCE AND TECHNOLOGY, 2011, 15 (02) : 192 - 205
  • [2] Cutting performance and wear mechanism of Si3N4-based micro/nano composite ceramics tool in high speed cutting
    Lü, Zhi-Jie
    Yang, Guang-An
    Cheng, Kai-Qiang
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2015, 25 (09): : 2517 - 2522
  • [3] Wear performance and mechanism of Si3N4 composite ceramic cutting tool
    Liu, Yourong
    Liu, Jiajun
    Zhu, Baoliang
    Mocaxue Xuebao/Tribology, 1997, 17 (02): : 105 - 114
  • [4] STRUCTURE AND CHARACTERISTICS OF SI3N4-BASED CERAMIC CUTTING TOOLS
    GNESIN, GG
    YAROSHENKO, VP
    SILICON NITRIDE 93, 1994, 89-9 : 737 - 741
  • [5] Wear maps of Si3N4 ceramic cutting tool
    Y. R. Liu
    J. J. Liu
    B.-L Zhu
    Z. R. Zhou
    L. Vincent
    P. Kapsa
    Journal of Materials Engineering and Performance, 1997, 6 : 671 - 675
  • [6] Wear maps of Si3N4 ceramic cutting tool
    Liu, YR
    Liu, JJ
    Zhu, BL
    Zhou, ZR
    Vincent, L
    Kapsa, P
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 1997, 6 (05) : 671 - 675
  • [7] The influence of components on the high-temperature performance and cutting performance of Si3N4-based ceramic tools
    Xu, Weiwei
    Zhang, Zuoxuan
    Wang, Boxiang
    Jiang, Liyi
    Yan, Guodong
    Guan, Li
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2025, 22 (01)
  • [8] Influence of TiN coating thickness on the wear of Si3N4-based cutting tools
    Cheng, HE
    Hon, MH
    SURFACE & COATINGS TECHNOLOGY, 1996, 81 (2-3): : 256 - 261
  • [9] Reliability prediction of a microwave sintered Si3N4-based composite ceramic tool
    Xu, Weiwei
    Yin, Zengbin
    Yuan, Juntang
    Yan, Guodong
    CERAMICS INTERNATIONAL, 2021, 47 (12) : 16737 - 16745
  • [10] Fabrication and cutting performance of centripetally textured Si3N4-based ceramic tools by low temperature hot extrusion
    Li, Ze-Hua
    Tang, Shao-Jun
    Yu, Jun-Jie
    Guo, Wei-Ming
    Lin, Hua-Tay
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2025, 128
12345