Hydrogen enhanced the room-temperature compressive properties of Ti44Al6Nb alloy

被引:15
|
作者
Ma, T. F. [1 ]
Chen, R. R. [1 ]
Zheng, D. S. [1 ]
Guo, J. J. [1 ]
Ding, H. S. [1 ]
Su, Y. Q. [1 ]
Fu, H. Z. [1 ]
机构
[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Heilongjiang, Peoples R China
关键词
Intermetallic alloys and compounds; Hydrogen; Microstructure; Compressive property; GAMMA-TITANIUM ALUMINIDE; HIGH-PRESSURE HYDROGEN; ELASTIC-MODULUS; TIAL ALLOY; DESIGN; MICROSTRUCTURES;
D O I
10.1016/j.matlet.2017.11.022
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of hydrogen content on room temperature compressive properties of Ti44Al6Nb (at.%) alloy was studied. The results show that hydrogen promotes a solid solution strengthening in TiAl alloys, the microhardness increases with increasing of hydrogen content, which is increased by 40% after hydrogenation with 1.22 at.% H. As hydrogen content increases, the ultimate compressive strength and fracture strain increases firstly and then decreases. The Ti44Al6Nb alloy exhibits higher compressive strength and plasticity after addition of 0.42 at.% H, which is enhanced by 10% and 31% respectively. The distinct effect of hydrogen on the mechanical properties of TiAl alloys is attributed to the hydrogen-promoted dislocation motion and hydrogen-induced solution strengthening. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:170 / 173
页数:4
相关论文
共 50 条
  • [21] Effect of cyclic DHT on microstructural evolution and mechanical properties of Ti44Al6Nb1Cr2V alloy
    Liu, Yangli
    Zheng, Weiwei
    Fang, Hongze
    Yang, Yaohua
    Chen, Ruirun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 936
  • [22] Room-Temperature Compressive Deformation Behavior of High-Strength Ti-15V-3Al-3Cr-3Sn-1Nb-1Zr Alloy
    Zhaohui Zhang
    Quanming Liu
    Haiying Yang
    Shifeng Liu
    Journal of Materials Engineering and Performance, 2017, 26 : 3368 - 3375
  • [23] Effects of cyclic thermo-hydrogen processing on microstructural and mechanical properties of Ti6Al4V alloy at room temperature
    Yuan, Baoguo
    Zhang, Xiaoxue
    Wang, Yujie
    Chen, Qiang
    Wan, Yuanyuan
    Zheng, Yubin
    Xing, Zhihui
    Zhan, Hong
    VACUUM, 2020, 171
  • [24] Microstructure and mechanical properties of Ti44Al6Nb1Cr2V alloy after gaseous hydrogen charging at 1373–1693 K
    Teng-Fei Ma
    Rui-Run Chen
    De-Shuang Zheng
    Jing-Jie Guo
    Hong-Sheng Ding
    Yan-Qing Su
    Heng-Zhi Fu
    Rare Metals, 2023, 42 : 664 - 671
  • [25] Room and high temperature mechanical behavior of Ti-Al-Nb-Mo alloy reinforced with Ti2AlN ceramic particles
    Tan, Yingmei
    Fang, Hongze
    Cui, Hongzhi
    Liu, Yangli
    Chen, Ruirun
    Su, Yanqing
    Guo, Jingjie
    Fu, Hengzhi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 797
  • [26] Effect of Yttrium Addition on Microstructures and Room Temperature Tensile Properties of Ti-47Al Alloy
    李宝辉
    孔凡涛
    陈玉勇
    JournalofRareEarths, 2006, (03) : 352 - 356
  • [27] Effect of yttrium addition on microstructures and room temperature tensile properties of Ti-47Al alloy
    Li Baohui
    Kong Fantao
    Chen Yuyong
    JOURNAL OF RARE EARTHS, 2006, 24 (03) : 352 - 356
  • [28] Hydrogen-induced softening of Ti-44Al-6Nb-1Cr-2V alloy during hot deformation
    Ma, Tengfei
    Chen, Ruirun
    Zheng, Deshuang
    Guo, Jingjie
    Ding, Hongsheng
    Su, Yanqing
    Fu, Hengzhi
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (12) : 8329 - 8337
  • [29] Hydrogen-Induced Improvement of the Cylindrical Drawing Properties of a Ti-22Al-25Nb Alloy
    Shao, Bin
    Wan, Shengxiang
    Shan, Debin
    Guo, Bin
    Zong, Yingying
    ADVANCED ENGINEERING MATERIALS, 2017, 19 (03)
  • [30] EVOLUTION OF MICROSTRUCTURES AND PROPERTIES OF Ti-44Al-6V-3Nb-0.3Y ALLOY AFTER FORGING AND ROLLING
    Chen, Yuyong
    Niu, Hongzhi
    Xiao, Shulong
    Sun, Ping
    Zhang, Changjiang
    TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND INTERFACES, 2012, : 849 - 856