Analysis of the Influence of Material Parameters on Efficiency of Switched Reluctance Motor

被引：0
作者：
Wcislik, Mirosaw [1 ]
Suchenia, Karol [1 ]
机构：
[1] Kielce Univ Technol, Fac Elect Engn Automat Control & Comp Sci, Kielce, Poland
来源：
2018 CONFERENCE ON ELECTROTECHNOLOGY: PROCESSES, MODELS, CONTROL AND COMPUTER SCIENCE (EPMCCS) | 2018年
关键词：
switched reluctance motor; identification; efficiency;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
The paper deals with analysis of an influence of rotor magnetic materials on the efficiency of switched reluctance motor. Considered were composites, electrical sheets and ferrite. The characteristics inductance and losses as a function of the rotation angle for these materials were presented and compared. For identification of the parameters of the switched reluctance motor, a test bench was constructed. Parameters of electric motor as a function of rotor rotation angle were identified. The equivalent resistance and inductance of the motor as a function of the rotor rotation angle was determined. The least squares method was used to determine the parameters. To measure the efficiency of the reluctance motor, the test bench was constructed. This test bench consist of also a torque sensor and an additional motor as a load.
引用
收藏
页数：5
相关论文
共 50 条
  • [31] Loss Analysis and Calculation Method of the Switched Reluctance Motor
    Wu, Hongxing
    Zhao, Kaiqi
    Zhou, Shouming
    Zheng, Jigui
    POWER AND ENERGY SYSTEMS III, 2014, 492 : 90 - +
  • [32] Numerical Modeling and Parametric Analysis of a Switched Reluctance Motor
    Gliga, Marian
    Munteanu, Cahn
    Andreica, Sergiu
    Pacurar, Claudia
    Constantinescu, Claudia
    Giurgiuman, Adina
    Pop, Joan
    PROCEEDINGS OF 2019 8TH INTERNATIONAL CONFERENCE ON MODERN POWER SYSTEMS (MPS), 2019,
  • [33] Analysis of electrical faults for switched reluctance motor driver
    Chen, H
    Zhang, C
    PROCEEDINGS OF THE 3RD WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION, VOLS 1-5, 2000, : 666 - 669
  • [34] Converter topologies for Switched Reluctance Motor drives
    Kumar, R.
    Gupta, R. A.
    Bishnoi, S. K.
    INTERNATIONAL REVIEW OF ELECTRICAL ENGINEERING-IREE, 2008, 3 (02): : 289 - 299
  • [35] Optimized techniques for driving and control of the switched reluctance motor to improve efficiency
    da Cunha Reis, Marcio Rodrigues
    Hilario de Araujo, Wanderson Rainer
    Gomes, Viviane Margarida
    dos Santos e Silva, Felippe
    Ganzaroli, Cleber Asmar
    Gomes, Flavio Adalberto
    Wainer, Gabriel Andres
    Calixto, Wesley Pacheco
    CONTROL ENGINEERING PRACTICE, 2019, 90 : 1 - 18
  • [36] Core losses model of switched reluctance motor
    Wcislik, Miroslaw
    Suchenia, Karol
    2015 SELECTED PROBLEMS OF ELECTRICAL ENGINEERING AND ELECTRONICS (WZEE), 2015,
  • [37] Comparison of Vibration Between an Evaporative Cooling Switched Reluctance Motor and a Conventional Switched Reluctance Motor
    Ru, Luan
    2017 IEEE 58TH INTERNATIONAL SCIENTIFIC CONFERENCE ON POWER AND ELECTRICAL ENGINEERING OF RIGA TECHNICAL UNIVERSITY (RTUCON), 2017,
  • [38] Comparison of Vibration Between an Evaporative Cooling Switched Reluctance Motor and a Conventional Switched Reluctance Motor
    Ru, Luan
    2018 21ST INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2018, : 2483 - 2486
  • [39] Firing angle adjustment for switched reluctance motor efficiency increasing based on measured and simulated data
    Bober, Peter
    Ferkova, Zelmira
    ELECTRICAL ENGINEERING, 2022, 104 (01) : 191 - 202
  • [40] Firing angle adjustment for switched reluctance motor efficiency increasing based on measured and simulated data
    Peter Bober
    Želmíra Ferková
    Electrical Engineering, 2022, 104 : 191 - 202
12345