Thermal buckling response and fracture analysis for delaminated fiber reinforced composite plates under thermo-mechanical coupling

被引:6
作者
Tian, Xinpeng [1 ]
Yao, Dong [2 ]
Li, Qun [1 ]
机构
[1] Xi An Jiao Tong Univ, Sch Aerosp, State Key Lab Strength & Vibrat Mech Struct, Xian, Shaanxi, Peoples R China
[2] Fourth Acad CASC, Inst 41, Natl Key Lab Combust Flow & Thermostruct, Beijing, Peoples R China
基金
中国国家自然科学基金;
关键词
Delamination; fiber reinforced composite plates; strain energy release rate; thermal buckling; thermo-mechanical coupling; CRACK CLOSURE TECHNIQUE; RELEASE RATE CALCULATION; NEAR-THE-SURFACE; LAMINATED COMPOSITE; MULTIPLE DELAMINATIONS; SANDWICH PLATES; GROWTH; SHELLS; PANELS; FRONT;
D O I
10.1177/0021998318769132
中图分类号
TB33 [复合材料];
学科分类号
摘要
Fiber reinforced composites are often subjected to severe thermal-mechanical coupling loads. In order to predict the stiffness and strength of the designed composites, thermal buckling response of the delaminated fiber reinforced composite plates and fracture analysis along the delamination front under thermo-mechanical coupling are investigated based on the generalized layerwise plate theory. Delamination between individual layers is considered as discontinuities in the displacement field using Heaviside step functions in the finite element model of delaminated composite plates. Governing equations are derived using virtual work principle and fracture analysis is performed by calculation of the strain energy release rate along the delamination front by means of the virtual crack closure technique. The effect of laying angle, delamination size, and delamination position on the critical thermal buckling temperature of laminated composite plates are investigated. Numerical results reveal that the critical thermal buckling temperature is insensitive to the delamination size less than an 'irrelevant size' and then significantly decreases with the increase of delamination sizes. The inside delamination has a greater influence on the critical thermal buckling temperature than the outside delamination. The maximum values of strain energy release rate always occur in the 'equivalent material direction' when the delamination is located in the middle of composite plates, while it is determined by laying angle and delamination position together for non-middle plane delamination.
引用
收藏
页码:3715 / 3730
页数:16
相关论文
共 50 条
[21]   Thermo-mechanical Properties of Sandwich Composite Plates with MWCNT Reinforced Honeycomb Core: A Numerical and Experimental Study [J].
Bodduru, Kamesh ;
Singh, Lavish Kumar ;
Kassa, Mesfin Kebede ;
Al-Fatlawi, Alaa ;
Arumugam, Ananda Babu .
FIBERS AND POLYMERS, 2023, 24 (10) :3673-3688
[22]   Thermo-mechanical post-buckling analysis of variable angle tow composite plate assemblies [J].
Oliveri, V. ;
Milazzo, A. ;
Weaver, P. M. .
COMPOSITE STRUCTURES, 2018, 183 :620-635
[23]   Buckling and post-buckling analysis of delaminated piezo-composite material under electro-mechanical loading [J].
Chitsaz, Nasim ;
Ovesy, Hamid R. ;
Kharazi, Mahsa .
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2016, 27 (13) :1780-1791
[24]   Thermal buckling analysis of sandwich plates with soft core and CNT-Reinforced composite face sheets [J].
Kamarian, Saeed ;
Bodaghi, Mahdi ;
Isfahani, Reza Barbaz ;
Song, Jung-il .
JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2021, 23 (08) :3606-3644
[25]   NURBS-based thermal buckling analysis of graphene platelet reinforced composite laminated skew plates [J].
Kiani, Y. .
JOURNAL OF THERMAL STRESSES, 2020, 43 (01) :90-108
[26]   Thermo-Mechanical Buckling and Non-Linear Free Oscillation of Functionally Graded Fiber-Reinforced Composite Laminated (FG-FRCL) Beams [J].
Alimoradzadeh, Mehdi ;
Heidari, Habib ;
Tornabene, Francesco ;
Dimitri, Rossana .
APPLIED SCIENCES-BASEL, 2023, 13 (08)
[27]   Fracture mechanical finite element analysis for delaminated composite plates applying the first-order shear deformation plate theory [J].
Hauck, Bence ;
Szekrenyes, Andras .
COMPOSITE STRUCTURES, 2023, 308
[28]   Non-linear stability characteristics of randomly distributed CNT-reinforced fiber composite beams under thermo-mechanical loadings [J].
Chakraborty, Sumeet ;
Dash, Satyajeet ;
Dey, Tanish .
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 2024, 52 (09) :7021-7044
[30]   Thermo-elastic Stresses in a Functional Graded Material under Thermal Loading, Pure Bending and Thermo-mechanical Coupling [J].
Zhang, Wei ;
Ni, Pengcheng ;
Liu, Bingfei .
CMC-COMPUTERS MATERIALS & CONTINUA, 2014, 44 (02) :105-122