Interface analysis of 7B52 Al alloy laminated composite fabricated by hot-roll bonding

被引：12

作者：

Zhou, Gu-xin ^{[1
]}

Lang, Yu-jing ^{[1
]}

Hao, Jie ^{[1
]}

Liu, Wen ^{[1
]}

Wang, Sheng ^{[1
]}

Qiao, Li ^{[1
]}

Chen, Min ^{[1
]}

机构：

[1] China Acad Ordnance Sci, Ningbo Branch, Ningbo 315103, Zhejiang, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2016年 / 26卷 / 05期

关键词：

7B52 aluminium alloy laminated composite; hot-roll bonding; microstructure; interfacial analysis; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; MICROSTRUCTURE; STRENGTH; LAYER;

D O I：

10.1016/S1003-6326(16)64227-9

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The bonding interface of 7B52 Al alloy laminated composite (ALC) fabricated by hot rolling was investigated using optical microscopy (OM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), ultrasonic flaw detection (UFD), and bonding strength tests. The results show that metallurgical bonding is achieved at the interface after composite rolling. The TEM analysis and tensile tests indicate that the 7B52 ALC plate combines high strength of the hard individual layer and good toughness of the soft individual layer. However, UFD technology and SEM analysis prove that the defects (thick oxide films, acid washed residues, air, oil and coarse particles) existing in the bonding interface are harmful to the bonding strength. To sum up, the composite rolling process is suitable for 7B52 ALC plate, and the content and size of the defects should be controlled strictly. Advanced surface treatment of each individual layer would be beneficial to further improve the bonding quality.

引用

页码：1269 / 1275

页数：7

共 20 条

[1]

ALMAN DE, 1994, JOM-J MIN MET MAT S, V46, P31, DOI 10.1007/BF03220646

[2] Effect of Individual Layer Shape on the Mechanical Properties of Dissimilar Al Alloys Laminated Metal Composite Sheets [J].

Chen, Zejun ;

Wu, Xia ;

Hu, Hongbo ;

Chen, Quanzhong ;

Liu, Qing .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (03) :990-1001

[3] Ultrasonic arrays for non-destructive evaluation: A review [J].

Drinkwater, Bruce W. ;

Wilcox, Paul D. .

NDT & E INTERNATIONAL, 2006, 39 (07) :525-541

[4] On the relationship between microstructure, strength and toughness in AA7050 aluminum alloy [J].

Dumont, D ;

Deschamps, A ;

Brechet, Y .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2) :326-336

[5] Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air [J].

Harach, DJ ;

Vecchio, KS .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (06) :1493-1505

[6] Strain behaviour of copper-intermetallic layered composite [J].

Konieczny, M. ;

Dziadon, A. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 460 :238-242

[7] Relations between Microstructure and Mechanical Properties in Laminated Ti-Intermetallic Composites Synthesized Using Ti and Al Foils [J].

Konieczny, Marek .

MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE VII, 2014, 592-593 :728-731

[8]

LI J, 2013, J APPL SCI, V13, P1376, DOI DOI 10.3923/jas.2013.1376.1381

[9] Microstructural development and its effects on mechanical properties of Al/Cu laminated composite [J].

Li, Xiao-bing ;

Zu, Guo-yin ;

Wang, Ping .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (01) :36-45

[10] Macro- and micro-surface engineering to improve hot roll bonding of aluminum plate and sheet [J].

Liu, Jiantao ;

Li, Ming ;

Sheu, Simon ;

Karabin, M. E. ;

Schultz, R. W. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 479 (1-2) :45-57

← 1 2 →