This article presented a compact bandpass filter with wide-stopband performance. Two substrate integrated waveguide (SIW) cavities and a short-circuited coplanar line introduced between the two cavities are used to realize a compact third-order bandpass filter. The passband is generated by combining the resonant frequency of TE101 mode of the SIW cavities and the fundamental resonant frequency of the short-circuited coplanar line. The size of the proposed filter reduces significantly in comparison with conventional third-order SIW filters. Moreover, the center frequency (CF) and the bandwidth of the filter can be controlled by adjusting the structural parameters of the filter. In addition, the first higher-order mode TE102 of the SIW cavity is suppressed by minimizing the coupling of TE102 mode in order to obtain wide-stopband performance. The proposed filter is designed, fabricated, and measured, and the simulation and measurement results show a good agreement. The filter exhibits compact size, low loss, and a rejection higher than 20 dB up to 1.94f(0).
引用
收藏
页码:345 / 351
页数:7
相关论文
共 16 条
[1]
[Anonymous], 2001, Microstrip Filters for RF/Microwave Applications, DOI [10.1002/0471221619, DOI 10.1002/0471221619]