Enhanced pyroelectric figure of merits in Sr and Zr co-doped porous BaTiO3 ceramics

Porous Ba0.85Sr0.15Zr0.1Ti0.9O3 (BSZT + X wt% Poly-vinyl alcohol (PVA)) with X = 0, 5, 10, 15 ceramics were prepared by the conventional solid-state reaction method. Structural, dielectric, ferroelectric, and pyroelectric properties were systematically investigated with the increase in pore-forming agent PVA. X-ray diffraction (XRD) pattern shows co-existence of tetragonal and orthorhombic symmetries with space group P4mm and Amm2, respectively. Microstructure depicts the pore density in the ceramic samples increases with increase in PVA content. The temperature-dependent dielectric analysis illustrates that there is no change in Curie temperature (T-c ~ 327K) with the increase in PVA. Dielectric constant value decreases and dielectric loss increases with increase in PVA. The pyroelectric coefficient increases with the applied field and decreases with an increase in PVA. We observed strongly enhanced pyroelectric figure of merits (FOMs) with an increase in porosity content. At room temperature, porous BSZT ceramic sample (BSZT + 15 wt% PVA) exhibits a 29.17% increase in pyroelectric energy harvesting figure of merit F-e, 101.73% increase in energy harvesting figure of merit F-e*, 81.93% increase in voltage responsivity F-v, 10.95% increase in current responsivity F-i, 24.97% increase in detectivity-based FOM compared to dense ceramic sample. The enhancement in these FOMs is useful in the development of pyroelectric devices.