Sliding ratio for novel cycloidal gear drive

被引：8

作者：

Xu, Lizhong ^{[1
]}

Li, Shuang ^{[1
]}

Wang, Wenping ^{[1
]}

机构：

[1] Yanshan Univ, Sch Mech Engn, Qinhuangdao, Peoples R China

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2018年 / 232卷 / 21期

关键词：

Sliding ratio; cycloidal gear; novel cycloid; DESIGN;

D O I：

10.1177/0954406217743272

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, for a novel spur cycloidal gear drive with a modified tooth profile, the equations of the sliding ratio are deduced from those of its tooth profile. Using the sliding ratio equations, the sliding ratio of the novel cycloidal gear drive is investigated and effects of the drive parameters on the sliding ratio are analysed. The sliding ratio of the novel cycloidal gear drive is then compared with that of an involute gear drive. The results show that the sliding ratio of the novel cycloidal gear drive is small and distributed evenly along its rotating angles, which makes the drive operate smoothly and have a long wear life.

引用

页码：3954 / 3963

页数：10

共 18 条

[1] Analysis of the Material and Design Modifications Influence on Strength of the Cycloidal Gear System [J].

Biernacki, Krzysztof .

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2015, 16 (03) :537-546

[2] Selection of the optimum tooth profile for plastic cycloidal gears [J].

Biernacki, Krzysztof .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2014, 228 (18) :3395-3404

[3] A New Design of a Two-Stage Cycloidal Speed Reducer [J].

Blagojevic, Mirko ;

Marjanovic, Nenad ;

Djordjevic, Zorica ;

Stojanovic, Blaza ;

Disic, Aleksandar .

JOURNAL OF MECHANICAL DESIGN, 2011, 133 (08)

[4]

Chen H, 2012, THESIS HARBIN I TECH

[5]

Davey K, 2014, EEE T MAGNET, V50

[6] Research on the Compensation Method for the Measurement Error of Cycloidal Gear Tooth Flank [J].

Fang, Suping ;

Liu, Yongsheng ;

Wang, Huiyi ;

Taguchi, Tetsuya ;

Takeda, Ryohei .

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2014, 15 (10) :2065-2069

[7] On Martin Disteli's spatial cycloidal gearing [J].

Figliolini, Giorgio ;

Stachel, Hellmuth ;

Angeles, Jorge .

MECHANISM AND MACHINE THEORY, 2013, 60 :73-89

[8] Theoretical and experimental analysis of a cycloidal speed reducer [J].

Gorla, Carlo ;

Davoli, Piermaria ;

Rosa, Francesco ;

Longoni, Claudio ;

Chiozzi, Franco ;

Samarani, Alessandro .

JOURNAL OF MECHANICAL DESIGN, 2008, 130 (11) :1126041-1126048

[9] Determination of surface singularities of a cycloidal gear drive with inner meshing [J].

Hwang, Yii-Wen ;

Hsieh, Chiu-Fan .

MATHEMATICAL AND COMPUTER MODELLING, 2007, 45 (3-4) :340-354

[10]

[李远庆 Li Yuanqing], 2010, [机械传动, Journal of Mechanical Transmission], V34, P6

← 1 2 →