In Situ Microstructure Characterization of Potassium Di-Phosphate (KDP) Densification during Cold Sintering

Featured Application Ceramic additive manufacturing (AM) denotes an emerging group of advanced ceramic component manufacturing routes. Low energy densification of AM ceramic green bodies is highly desirable, and the cold sintering process (CSP) is a promising candidate, illustrated here by an in situ study of CSP for a model system, potassium di-phosphate (KDP). In order for ceramic additive manufacturing (AM) to achieve its full potential, it is increasingly important to develop a more rigorous understanding of fundamental phenomena that govern the kinetics and thermodynamics of ceramic AM processes. In the case of additive build processes, such as direct ink write and ceramic extrusion, methods for densifying the resulting green-body product need to be considered to complement the efficiencies of ceramics AM, itself. One densification route, at least for monolithic components, built layer-by-layer, is offered by the recently developed cold sintering process, whereby high-density final product is achieved through addition of a small amount of liquid solvent and application of modest uniaxial compressive stress at relatively low temperature. In situ small-angle X-ray scattering methods and X-ray diffraction have been applied to characterize and quantify the pore morphology evolution during cold sintering for a model system: potassium di-phosphate, KH2PO4 (KDP). It is shown that both temperature and applied stress affect the densification rate, but stress has a stronger effect on the evolving morphology. A regime with an approximate linear densification rate can be identified, yielding an effective densification activation energy of approximate to 90 kJ/mol.