Reactions between SiC and sintering aids in Si3N4/SiC nanocomposites and their consequences

被引:12
|
作者
Zhou, RC [1 ]
Feng, ZC [1 ]
Liang, Y [1 ]
Zheng, F [1 ]
Xian, QG [1 ]
机构
[1] Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
关键词
sintering; nanocomposites; SiC; Si3N4; reactions;
D O I
10.1016/S0272-8842(01)00003-7
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Si3N4/SiC nanocomposites were fabricated by hot-pressing mixtures of submicron alpha -Si3N4, SiC nanopowders with sintering aids. XRD, TEM and SEM were used to study the effects of SiC additions on sintering behavior and microstructure of Si3N4; EDAX was employed to investigate the composition of interfaces. The results showed that nano-SiC addition led to loss and compositional modification of intergranular phases and limited the densification and phase transformation of Si3N4 Reactions between sintering aids and nano-SiC are thermodynamically calculated and the temperature and N-2 pressure dependence of the reactions are also theoretically analyzed. Influences of these reactions on the effects of SIC additions are discussed. (C) 2001 Elsevier Science Ltd and Techna S.r.l. All rights reserved.
引用
收藏
页码:571 / 576
页数:6
相关论文
共 50 条
  • [1] Synthesis and properties of porous Si3N4/SiC nanocomposites by carbothermal reaction between Si3N4 and carbon
    Yang, JF
    Zhang, GJ
    Kondo, N
    Ohji, T
    ACTA MATERIALIA, 2002, 50 (19) : 4831 - 4840
  • [2] Study on chemical processing of Si3N4/SiC nanocomposites
    Zhang, JX
    RARE METAL MATERIALS AND ENGINEERING, 2004, 33 : 226 - 229
  • [3] Liquid phase sintering of Si3N4/SiC nanopowders derived from silica fume
    Suri, Jyothi
    Shaw, Leon L.
    CERAMICS INTERNATIONAL, 2014, 40 (07) : 9179 - 9187
  • [4] Properties of hot-pressed of SiC/Si3N4 nanocomposites
    Luo fa
    Zhu dongmei
    Su xiaolei
    Zhou wancheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 458 (1-2): : 7 - 10
  • [5] Mechanical properties of Si3N4/SiC nanocomposites studied by instrumented indentation with spheres
    Hvizdos, P
    Kasiarová, M
    Dusza, J
    Hnatko, M
    Sajgalík, P
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2004, 24 (12) : 3345 - 3350
  • [6] Mechanical properties of Si3N4/SiC nanocomposites measured by instrumented indentation with sphere
    Hvizdos, P
    Kasiarová, M
    Dusza, J
    Hnatko, M
    Sajgalík, P
    KOVOVE MATERIALY-METALLIC MATERIALS, 2004, 42 (01): : 51 - 62
  • [7] Si3N4/SiCN nanocomposites:: Influence of SiC nanoprecipitates on the creep behaviour
    Besson, JL
    Mayne, M
    Bahloul-Hourlier, D
    Goursat, P
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (13) : 1893 - 1904
  • [8] Fabrication and mechanical properties of Si3N4/SiC/TiAgCu multilayered nanocomposites
    Seo, DW
    Lim, JK
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2004, 5 (03): : 281 - 286
  • [9] Si3N4 with comparable permeability to SiC
    Park, Young-Jo
    Song, In-Hyuck
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (02) : 471 - 475
  • [10] Properties of Si3N4/SiC composites produced via spark plasma sintering
    Taslicukur, Zeynep
    Sahin, Filiz Cinar
    Kuskonmaz, Nilgun
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2012, 103 (11) : 1337 - 1339