Thermal modeling of cylindrical lithium ion battery during discharge cycle

被引:293
作者
Jeon, Dong Hyup [1 ]
Baek, Seung Man [1 ]
机构
[1] Seoul Natl Univ, Sch Mech & Aerosp Engn, Seoul 151744, South Korea
关键词
Li-ion battery; Cylindrical; Thermal behavior; Heat generation; FEA; SECONDARY BATTERIES; HEAT-GENERATION; POLYMER BATTERY; BEHAVIOR; CELLS; INTERCALATION; TEMPERATURE; SIMULATIONS; CATHODES; ANODES;
D O I
10.1016/j.enconman.2011.04.013
中图分类号
O414.1 [热力学];
学科分类号
摘要
Transient and thermo-electric finite element analysis (FEA) of cylindrical lithium ion (Li-ion) battery was presented. The simplified model by adopting a cylindrical coordinate was employed. This model provides the thermal behavior of Li-ion battery during discharge cycle. The mathematical model solves conservation of energy considering heat generations due to both joule heating and entropy change. A LiCoO(2)/C battery at various discharge rates was investigated. The temperature profile from simulation had similar tendency with experiment. The temperature profile was decomposed with contributions of each heat sources and was presented at several discharge rates. It was found that the contribution of heat source due to joule heating was significant at a high discharge rate, whereas that due to entropy change was dominant at a low discharge rate. Also the effect of cooling condition and the LiNiCoMnO(2)/C battery were analyzed for the purpose of temperature reduction. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2973 / 2981
页数:9
相关论文
共 31 条
  • [1] Comparison between computer simulations and experimental data for high-rate discharges of plastic lithium-ion batteries
    Arora, P
    Doyle, M
    Gozdz, AS
    White, RE
    Newman, J
    [J]. JOURNAL OF POWER SOURCES, 2000, 88 (02) : 219 - 231
  • [2] Temperature and current distribution in thin-film batteries
    Baker, DR
    Verbrugge, MW
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1999, 146 (07) : 2413 - 2424
  • [3] A GENERAL ENERGY-BALANCE FOR BATTERY SYSTEMS
    BERNARDI, D
    PAWLIKOWSKI, E
    NEWMAN, J
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1985, 132 (01) : 5 - 12
  • [4] Thermal analysis of lithium-ion batteries
    Chen, SC
    Wan, CC
    Wang, YY
    [J]. JOURNAL OF POWER SOURCES, 2005, 140 (01) : 111 - 124
  • [5] HEAT-TRANSFER PHENOMENA IN LITHIUM POLYMER-ELECTROLYTE BATTERIES FOR ELECTRIC VEHICLE APPLICATION
    CHEN, Y
    EVANS, JW
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1993, 140 (07) : 1833 - 1838
  • [6] Comparison of modeling predictions with experimental data from plastic lithium ion cells
    Doyle, M
    Newman, J
    Gozdz, AS
    Schmutz, CN
    Tarascon, JM
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1996, 143 (06) : 1890 - 1903
  • [7] MODELING OF GALVANOSTATIC CHARGE AND DISCHARGE OF THE LITHIUM POLYMER INSERTION CELL
    DOYLE, M
    FULLER, TF
    NEWMAN, J
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1993, 140 (06) : 1526 - 1533
  • [8] Preparation and characterization of 18650 Li(Ni1/3Co1/3Mn1/3)O2/graphite high power batteries
    He, Yan-Bing
    Tang, Zhi-Yuan
    Song, Quan-Sheng
    Xie, Hui
    Yang, Quan-Hong
    Liu, Yuan-Gang
    Ling, Guo-Wei
    [J]. JOURNAL OF POWER SOURCES, 2008, 185 (01) : 526 - 533
  • [9] Holman J.P., 1986, Heat Transfer, Vsixth
  • [10] Electrochemical-calorimetric studies of lithium-ion cells
    Hong, JS
    Maleki, H
    Al Hallaj, S
    Redey, L
    Selman, JR
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1998, 145 (05) : 1489 - 1501