Hierarchical Characteristics of Hydrogen-Assisted Crack Growth and Microstructural Strain Evolution in Tempered Martensitic Steels: Case of Quasi-cleavage Fracture

被引：20

作者：

Chen, Tingshu ^{[1
,2
]}

Chiba, Takahiro ^{[3
,4
]}

Koyama, Motomichi ^{[5
,6
]}

Shibata, Akinobu ^{[7
,8
]}

Akiyama, Eiji ^{[5
]}

Takai, Kenichi ^{[9
]}

机构：

[1] Tohoku Univ, Inst Mat Res, Aoba Ku, 2-1-1 Katahira, Sendai, Miyagi 9808577, Japan

[2] Tohoku Univ, Grad Sch Engn, Aoba Ku, 6-6 Aramaki Aza Aoba, Sendai, Miyagi 9808579, Japan

[3] Sophia Univ, Grad Sch Sci & Technol, Tokyo 1028554, Japan

[4] Nippon Steel Co, Amagasaki, Hyogo, Japan

[5] Tohoku Univ, Inst Mat Res, Sendai, Miyagi, Japan

[6] Kyoto Univ, Elements Strategy Initiat Struct Mat ESISM, Sakyo Ku, Yoshida Honmachi, Kyoto 6068501, Japan

[7] Kyoto Univ, Elements Strategy Initiat Struct Mat ESISM, Kyoto, Japan

[8] Natl Inst Mat Sci, Res Ctr Struct Mat, 1-2-1 Sengen, Tsukuba, Ibaraki 3050047, Japan

[9] Sophia Univ, Dept Engn & Appl Sci, Tokyo 1028554, Japan

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2021年 / 52卷 / 10期

关键词：

LATH MARTENSITE; CRYSTALLOGRAPHIC FEATURES; INDUCED VACANCIES; EMBRITTLEMENT; PROPAGATION; MORPHOLOGY; FAILURE; DECOHESION; MECHANISMS; PLASTICITY;

D O I：

10.1007/s11661-021-06423-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The local plastic strain evolution associated with crack growth in hydrogen-assisted quasi-cleavage fracture was investigated using tempered lath martensitic steels. The quasi-cleavage crack grew via the following process. After crack initiation, the crack grew sharply to a certain length by repeated episodes of nano-void nucleation and coalescence. When the sharp crack tip intersected microstructural boundaries such as a lath or block, crack deflection/branching occurred. This was followed by crack tip blunting, which temporarily stopped crack growth. Further crack growth was possible via one of the following two routes: (1) sharp crack initiation/growth from the blunt crack tip, and (2) new crack initiation near the blunt crack tip. The newly formed cracks subsequently coalesced. Repetition of this multi-scale crack growth mechanism finally caused a quasi-cleavage fracture. Correspondingly, hierarchical crack morphologies were observed, which coincided with the lath martensitic microstructures and fractographic features. Furthermore, specific correlations were found between hydrogen-assisted cracking behavior and local plastic strain evolution at different spatial scales. Specifically, the largest plastic strain evolution occurred in the region where crack coalescence was observed. The second largest plastic strain evolution occurred when crack tip blunting occurred. Nanoscale local plasticity evolution around a sharp crack was also observed as an appearance of intense slip bands, indicating that the local plasticity played a key role in the hydrogen-related sharp crack growth.

引用

页码：4703 / 4713

页数：11

共 44 条

[11] Plastic deformation sequence and strain gradient characteristics of hydrogen-induced delayed crack propagation in single-crystalline Fe-Si alloy [J].

Huynh, Thanh Thuong ;

Koyama, Motomichi ;

Takahashi, Yoshimasa ;

Hamada, Shigeru ;

Tsuzaki, Kaneaki ;

Noguchi, Hiroshi .

SCRIPTA MATERIALIA, 2020, 178 :99-103

[12] MORPHOLOGY OF MARTENSITE IN IRON ALLOYS [J].

KRAUSS, G ;

MARDER, AR .

METALLURGICAL TRANSACTIONS, 1971, 2 (09) :2343-&

[13] Influence of sample geometry and microstructure on the hydrogen induced cracking characteristics under uniaxial load [J].

Laureys, A. ;

Depover, T. ;

Petrov, R. ;

Verbeken, K. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 690 :88-95

[14] Influence of hydrogen environment on dislocation nucleation and fracture response of ⟨1 1 0⟩ grain boundaries in nickel [J].

Li, Jiaqing ;

Lu, Cheng ;

Pei, Linqing ;

Zhang, Che ;

Wang, Rui ;

Tieu, Kiet .

COMPUTATIONAL MATERIALS SCIENCE, 2019, 165 :40-50

[15]

Lynch SP, 2011, STRESS CORROSION CRACKING: THEORY AND PRACTICE, P90

[16] On the formation and nature of quasi-cleavage fracture surfaces in hydrogen embrittled steels [J].

Martin, May L. ;

Fenske, Jamey A. ;

Liu, Grace S. ;

Sofronis, Petros ;

Robertson, Ian M. .

ACTA MATERIALIA, 2011, 59 (04) :1601-1606

[17]

Matsumoto T., 1981, SCRIPTA MATER, V15, P5

[18] The morphology and crystallography of lath martensite in alloy steels [J].

Morito, S. ;

Huang, X. ;

Furuhara, T. ;

Maki, T. ;

Hansen, N. .

ACTA MATERIALIA, 2006, 54 (19) :5323-5331

[19] The morphology and crystallography of lath martensite in Fe-C alloys [J].

Morito, S ;

Tanaka, H ;

Konishi, R ;

Furuhara, T ;

Maki, T .

ACTA MATERIALIA, 2003, 51 (06) :1789-1799

[20] Multiple mechanisms of lath martensite plasticity [J].

Morsdorf, L. ;

Jeannin, O. ;

Barbier, D. ;

Mitsuhara, M. ;

Raabe, D. ;

Tasan, C. C. .

ACTA MATERIALIA, 2016, 121 :202-214

← 1 2 3 4 5 →