High-temperature shear strength and hardness of cast lead-free solders

被引：3
作者：
Mahmudi, R. [1 ]
Maraghi, A. [1 ]
Geranmayeh, A. R. [2 ]
机构：
[1] Univ Tehran, Coll Engn, Sch Met & Mat Engn, Tehran, Iran
[2] Islamic Azad Univ, South Tehran Branch, Fac Engn, Dept Mech Engn, Tehran, Iran
来源：
KOVOVE MATERIALY-METALLIC MATERIALS | 2017年 / 55卷 / 03期
关键词：
lead-free solder; shear strength; hardness; INDENTATION CREEP; MECHANICAL-PROPERTIES; ALLOYS; TENSILE; MICROSTRUCTURE; BEHAVIOR; PUNCH; TIN; BI; DEFORMATION;
D O I：
10.4149/km_2017_3_211
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper compares the shear strength and hardness of the tin-based cast lead-free Sn-2Bi, Sn-5Sb, and Sn-9Zn binary solder alloys. This was achieved respectively by the shear punch testing (SPT) and Vickers hardness measurement in the temperature range 298-370 K. The results showed that the shear yield stress (SYS), ultimate shear strength (USS), and hardness (Hv) of all three alloys decrease with increasing test temperature. Among all tested materials, Sn-2Bi showed the highest strength and hardness over the whole testing temperature range. This is ascribed to the strong solid solution effect of Bi in the Sn matrix, which is superior to the weak solution hardening and particle strengthening effects of Sb in Sn-5Sb, and particle hardening of Zn in Sn-9Zn.
引用
收藏
页码：211 / 216
页数：6
相关论文
共 50 条
  • [31] High Temperature Tensile and Creep Behavior of Lead Free Solders
    Alam, Mohammad S.
    Suhling, Jeffrey C.
    Lall, Pradeep
    PROCEEDINGS OF THE 2017 SIXTEENTH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS ITHERM 2017, 2017, : 1229 - 1237
  • [32] Shear strength and fracture surface analysis of lead-free solder joints with high fraction of IMCs
    Qiu, Hongyu
    Hu, Xiaowu
    Li, Shuang
    Wan, Yongqiang
    Li, Qinglin
    VACUUM, 2020, 180
  • [33] Microstructure Evolution of SnAgCuEr Lead-free Solders Under High Temperature Aging
    Hu Hao
    Yaowu Shi
    Zhidong Xia
    Yongping Lei
    Fu Guo
    Journal of Electronic Materials, 2008, 37 : 2 - 8
  • [34] Microstructure evolution of SnAgCuEr lead-free solders under high temperature aging
    Hao, Hu
    Shi, Yaowu
    Xia, Zhidong
    Lei, Yongping
    Guo, Fu
    JOURNAL OF ELECTRONIC MATERIALS, 2008, 37 (01) : 2 - 8
  • [35] High-Temperature Micropillar Compression Creep Testing of Constituent Phases in Lead-Free Solder
    Mayer, Carl R.
    Lotfian, Saeid
    Molina-Aldareguia, Jon
    Chawla, Nikhilesh
    ADVANCED ENGINEERING MATERIALS, 2015, 17 (08) : 1168 - 1174
  • [36] Lead-free solders in microelectronics
    Abtew, M
    Selvaduray, G
    MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2000, 27 (5-6) : 95 - 141
  • [37] Lead-Free Alternatives for Interconnects in High-Temperature Electronics
    Mallampati, Sandeep
    Yin, Liang
    Shaddock, David
    Schoeller, Harry
    Cho, Junghyun
    JOURNAL OF ELECTRONIC PACKAGING, 2018, 140 (01)
  • [38] Effect of Aging Temperature on the Microstructure and Shear Strength of SAC0307-0.1Ni Lead-Free Solders in Copper Joints
    Russian Journal of Non-Ferrous Metals, 2020, 61 : 89 - 98
  • [39] High Temperature Aging Effects in SAC and SAC plus X Lead Free Solders
    Alam, Mohammad S.
    Hassan, K. M. Rafidh
    Suhling, Jeffrey C.
    Lall, Pradeep
    2019 IEEE 69TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2019, : 1815 - 1825
  • [40] High drop test reliability: Lead-free solders
    Amagai, M
    Toyoda, Y
    Ohnishi, T
    Akita, S
    54TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, VOLS 1 AND 2, PROCEEDINGS, 2004, : 1304 - 1309
12345