Numerical failure assessment of multi-bolt FRP composite joints with varying sizes and preloads of bolts

被引：55
作者：
Mandal, Bibekananda [1 ]
Chakrabarti, Anupam [1 ]
机构：
[1] Indian Inst Technol Roorkee, Dept Civil Engn, Roorkee 247667, Uttar Pradesh, India
来源：
COMPOSITE STRUCTURES | 2018年 / 187卷
关键词：
Failure analysis; FRP composite; Finite element analysis; Progressive damage; ABAQUS user-subroutine; FINITE-ELEMENT-ANALYSIS; HOLE CLEARANCE; LOAD DISTRIBUTION; SINGLE-BOLT; DOUBLE-LAP; STRENGTH; CRITERIA; TORQUE; DAMAGE; MODEL;
D O I：
10.1016/j.compstruct.2017.12.048
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
A three dimensional (3D) progressive damage model (PDM) is developed for the failure assessment of fibre reinforced plastic (FRP) composite bolted joints subjected to bolt preloads. Material constitutive equations and material damage model are defined in a user-subroutine UMAT which is integrated with the finite element (FE) software ABAQUS. Fibre and matrix failure in tension, compression or in shear along with delamination failure criteria are incorporated in the present numerical model. Load-displacement behavior, laminate surface strains, propagation of damage and failure of a double-lap multi-bolt composite joint have been studied and present results are validated with the results available in literature. Failure of double-lap multi-bolt FRP joints with different bolt diameters and bolt tightening torques have been investigated using the proposed progressive damage model.
引用
收藏
页码：169 / 178
页数：10
相关论文
共 40 条
  • [21] FE Modeling for Load Distribution Analysis of Multi-bolt Composite Joints
    Xu, Zhi-xiang
    Design, Manufacturing and Mechatronics, 2014, 551 : 104 - 107
  • [22] An analytical model for the prediction of load distribution in highly torqued multi-bolt composite joints
    McCarthy, C. T.
    Gray, P. J.
    COMPOSITE STRUCTURES, 2011, 93 (02) : 287 - 298
  • [23] Effects of laminate thickness, tapering and missing fasteners on the mechanical behaviour of single-lap, multi-bolt, countersunk composite joints
    Gray, P. J.
    O'Higgins, R. M.
    McCarthy, C. T.
    COMPOSITE STRUCTURES, 2014, 107 : 219 - 230
  • [24] Quantifying of secondary bending effect in multi-bolt single-lap carbon-epoxy composite joints via 3D-DIC
    Mehrabian, Masoud
    Boukhili, Rachid
    COMPOSITES SCIENCE AND TECHNOLOGY, 2020, 200
  • [25] Failure prediction of irregular arranged multi-bolt composite repair based on finite fracture mechanics model
    Li, Xiang
    Xie, Zonghong
    Zhao, Wei
    Zhang, Yongxiang
    Gong, Yu
    Hu, Ning
    ENGINEERING FRACTURE MECHANICS, 2021, 242
  • [26] An analytical model for strength prediction in multi-bolt composite joints at various loading rates
    Sharos, P. A.
    Egan, B.
    McCarthy, C. T.
    COMPOSITE STRUCTURES, 2014, 116 : 300 - 310
  • [27] A progressive damage analysis based characteristic length method for multi-bolt composite joints
    Zhang, Jianyu
    Liu, Fengrui
    Zhao, Libin
    Chen, Yuli
    Fei, Binjun
    COMPOSITE STRUCTURES, 2014, 108 : 915 - 923
  • [28] An experimental study of bolt-hole clearance effects in double-lap, multi-bolt composite joints
    Lawlor, VP
    McCarthy, MA
    Stanley, WF
    COMPOSITE STRUCTURES, 2005, 71 (02) : 176 - 190
  • [29] Probabilistic bolt load distribution analysis of composite single-lap multi-bolt joints considering random bolt-hole clearances and tightening torques
    Liu, Fengrui
    Shan, Meijuan
    Zhao, Libin
    Zhang, Jianyu
    COMPOSITE STRUCTURES, 2018, 194 : 12 - 20
  • [30] Pin-load distribution homogenization method of adjusting bolt-hole clearance and bolt torqued in multi-bolt composite joints
    Li P.
    Zhou W.
    Li B.
    Shao J.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2019, 40 (03):
1234