Experimental investigation of the effect of fiber-mat architecture on the unsaturated flow in liquid composite molding

被引:39
作者
Babu, BZ [1 ]
Pillai, KM [1 ]
机构
[1] Univ Wisconsin, Dept Mech Engn, Milwaukee, WI 53201 USA
关键词
resin transfer molding (RTM); mold-filling simulation; polymer composites; liquid composite molding (LCM); sink; dual scale porous medium; composites manufacturing; fiber wetting; thermosets;
D O I
10.1177/0021998304038176
中图分类号
TB33 [复合材料];
学科分类号
摘要
In liquid composite molding technologies such as RTM, this study of the inlet-pressure history for the constant flow-rate I-D flow experiment reveals that the measured pressure profile, which droop downwards as in earlier studies on the unsaturated flow, is at a variance with the linear pressure profile predicted by the physics used for state-of-the-art LCM mold filling simulations. The droop along with the error in the inlet-pressure predictions increase with an increase in the fiber-mat compression. The effect of fiber-mat architecture on the droop in the inlet-pressure profiles is studied and significant droops are observed for various stitched mats as compared to the woven mats. This study repudiates the long-held view that mere presence of cylindrical or elliptical tows in the woven or stitched fiber-mats automatically leads to the unsaturated flow characteristic of dual-scale porous media; rather the presence of continuous uninterrupted macrochannels along the flow direction for preferential channel-flow is found to be necessary for the appearance of a drooping inlet-pressure history characteristic of the unsaturated flow.
引用
收藏
页码:57 / 79
页数:23
相关论文
共 29 条
[1]  
BABU BZ, 2002, THESIS U WISCONSIN M
[2]  
BABU BZ, P SAMPE 2002 LONG BE
[3]  
BECKWITH S, 1998, SAMPE J, V34
[4]   TOW IMPREGNATION DURING RESIN TRANSFER MOLDING OF BIDIRECTIONAL NONWOVEN FABRICS [J].
CHAN, AW ;
MORGAN, RJ .
POLYMER COMPOSITES, 1993, 14 (04) :335-340
[5]   WETTING OF FIBER MATS FOR COMPOSITES MANUFACTURING .2. AIR ENTRAPMENT MODEL [J].
CHEN, YT ;
MACOSKO, CW ;
DAVIS, HT .
AICHE JOURNAL, 1995, 41 (10) :2274-2281
[6]  
DUNGAN FD, 2002, J COMPOSITE MAT, V35
[7]  
*ESI N AM, PAM RTM US MAN
[8]  
FOLEY MF, 1991, 23 INT SAMPE TECHN C
[9]   Measurement of in-plane permeability of anisotropic fiber reinforcements [J].
Gebart, BR ;
Lidstrom, P .
POLYMER COMPOSITES, 1996, 17 (01) :43-51
[10]   The effects of fluid type and viscosity on the steady-state and advancing front permeability behavior of textile preforms [J].
Hammond, VH ;
Loos, AC .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 1997, 16 (01) :50-72