共 66 条
Sol-gel assisted nano-structured SnO2 sensor for low concentration ammonia detection at room temperature
被引:30
作者:
Beniwal, Ajay
[1
]
Srivastava, Vibhu
[1
]
Sunny
[1
]
机构:
[1] Indian Inst Informat Technol, Dept Elect & Commun Engn, Allahabad, Uttar Pradesh, India
关键词:
Sol-gel;
nanostructured;
ammonia sensor;
metal oxides;
room temperature;
% response;
GAS-SENSING PROPERTIES;
THIN-FILM;
TIN OXIDE;
FABRICATION;
NANOSTRUCTURES;
NANOCOMPOSITE;
SENSITIVITY;
PERFORMANCE;
HUMIDITY;
BREATH;
D O I:
10.1088/2053-1591/aafdd8
中图分类号:
T [工业技术];
学科分类号:
08 ;
摘要:
SnO2 nanostructured thin film based gas sensor is fabricated by sol-gel spin coating technique. The performance of the fabricated sensor has been investigated for analytes viz. ammonia (NH3) solution, acetone (C3H6O), methanol (CH3OH) and 2-propanol (C3H8O) at room temperature (RT) with humidity level similar to 55% RH for concentration range 500 ppb-500 ppm. High response and good selectivity towards ammonia are observed with very fast response and recovery time at RT, for extreme low concentrations. Upon exposure to 500 ppb and 1 ppm of NH3, sensor manifests appreciable response similar to 28% and similar to 31.5%, respectively. High response of the sensor at RT is attributed due to porous nanograins (with average particle size similar to 50 nm) based SnO(2 )thin film layer. Nanograins structure is obtained due to addition of glycerine in the sol solution, which also leads to porosity enhancement of the sensing layer. Good reproducibility and appreciable immunity to drift behavior are other attributes of the fabricated device. X-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electron microscopy (SEM) results are used to study the structural, chemical composition, topography and morphological characteristics of the prepared SnO2 thin film, respectively.
引用
收藏
页数:13
相关论文