Sol-gel assisted nano-structured SnO2 sensor for low concentration ammonia detection at room temperature

被引:29
作者
Beniwal, Ajay [1 ]
Srivastava, Vibhu [1 ]
Sunny [1 ]
机构
[1] Indian Inst Informat Technol, Dept Elect & Commun Engn, Allahabad, Uttar Pradesh, India
关键词
Sol-gel; nanostructured; ammonia sensor; metal oxides; room temperature; % response; GAS-SENSING PROPERTIES; THIN-FILM; TIN OXIDE; FABRICATION; NANOSTRUCTURES; NANOCOMPOSITE; SENSITIVITY; PERFORMANCE; HUMIDITY; BREATH;
D O I
10.1088/2053-1591/aafdd8
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
SnO2 nanostructured thin film based gas sensor is fabricated by sol-gel spin coating technique. The performance of the fabricated sensor has been investigated for analytes viz. ammonia (NH3) solution, acetone (C3H6O), methanol (CH3OH) and 2-propanol (C3H8O) at room temperature (RT) with humidity level similar to 55% RH for concentration range 500 ppb-500 ppm. High response and good selectivity towards ammonia are observed with very fast response and recovery time at RT, for extreme low concentrations. Upon exposure to 500 ppb and 1 ppm of NH3, sensor manifests appreciable response similar to 28% and similar to 31.5%, respectively. High response of the sensor at RT is attributed due to porous nanograins (with average particle size similar to 50 nm) based SnO(2 )thin film layer. Nanograins structure is obtained due to addition of glycerine in the sol solution, which also leads to porosity enhancement of the sensing layer. Good reproducibility and appreciable immunity to drift behavior are other attributes of the fabricated device. X-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electron microscopy (SEM) results are used to study the structural, chemical composition, topography and morphological characteristics of the prepared SnO2 thin film, respectively.
引用
收藏
页数:13
相关论文
共 66 条
  • [1] Anisimov OV, 2007, SIBCON-2007: IEEE INTERNATIONAL SIBERIAN CONFERENCE ON CONTROL AND COMMUNICATION, P202, DOI 10.1109/SIBCON.2007.371325
  • [2] [Anonymous], 2016, J SENSORS, V2016, P1
  • [3] Synthesis of SnO2-CuO heterojunction using electrospinning and application in detecting of CO
    Bai, Shouli
    Guo, Wentao
    Sun, Jianhua
    Li, Jiao
    Tian, Ye
    Chen, Aifan
    Luo, Ruixian
    Li, Dianqing
    [J]. SENSORS AND ACTUATORS B-CHEMICAL, 2016, 226 : 96 - 103
  • [4] Highly sensitive NO2 sensor using brush-coated ZnO nanoparticles
    Chandra, Lalit
    Dwivedi, R.
    Mishra, V. N.
    [J]. MATERIALS RESEARCH EXPRESS, 2017, 4 (10):
  • [5] Quantitative analysis of ammonia on the breath of patients in end-stage renal failure
    Davies, S
    Spanel, P
    Smith, D
    [J]. KIDNEY INTERNATIONAL, 1997, 52 (01) : 223 - 228
  • [6] Investigation of the Carbon Monoxide Gas Sensing Characteristics of Tin Oxide Mixed Cerium Oxide Thin Films
    Durrani, Sardar M. A.
    Al-Kuhaili, Mohammad F.
    Bakhtiari, Imran A.
    Haider, Muhammad B.
    [J]. SENSORS, 2012, 12 (03): : 2598 - 2609
  • [7] SnO2 thin films used as ammonia sensing layers at room temperature
    Gaddari, A.
    Amjoud, M.
    Berger, F.
    Sanchez, J. B.
    Lahcini, M.
    Rhouta, B.
    Mezzane, D.
    Mavon, C.
    [J]. REMCES XII - XIIE RENCONTRE MAROCAINE SUR LA CHIMIE DE L'ETAT SOLIDE, 2013, 5
  • [8] Structural, morphological, electrical and optical studies of Cr doped SnO2 thin films deposited by the spray pyrolysis technique
    Gandhi, T. Indira
    Babu, R. Ramesh
    Ramamurthi, K.
    [J]. MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2013, 16 (02) : 472 - 479
  • [9] Enhanced ammonia sensing at room temperature with reduced graphene oxide/tin oxide hybrid films
    Ghosh, Ruma
    Nayak, Arpan Kumar
    Santra, Sumita
    Pradhan, Debabrata
    Guha, Prasanta Kumar
    [J]. RSC ADVANCES, 2015, 5 (62): : 50165 - 50173
  • [10] Gas sensing characteristics of SnO2 thin films and analyses of sensor response by the gas diffusion theory
    Gong, Shuping
    Liu, Jianqiao
    Xia, Jing
    Quan, Lin
    Liu, Huan
    Zhou, Dongxiang
    [J]. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2009, 164 (02): : 85 - 90