Heat transfer in a tapered fluidized bed of biomass particles with pulsed gas flow

Bed-to-surface heat transfer of pure biomass particles in a pulsed fluidized bed with a tapered bottom section was investigated. Three biomass species - Douglas fir, pine, and switchgrass - were studied under various operating conditions. Their heat transfer coefficients were found to be closely associated with hydrodynamics dominated by gas pulsations. A higher superficial gas velocity generally yielded better gas-solid contact and higher heat transfer rates. A moderately increasing pulsation frequency promoted convective heat transfer of particles but also reduced pulsation intensity, leading to undesired flow behaviours such as channelling and partial defluidization. The study of the pulsation duty cycle revealed that, for cohesive particles, a smaller duty cycle was preferred to generate powerful pulsations to break up inter-particle forces. Moreover, a duty cycle increase allowed higher gas throughput as long as a suitable fluidization was maintained. The addition of finer particles to a coarse fraction increased particle mobility, and subsequently heat transfer, which also explained the higher heat transfer coefficients of switchgrass as it contained more fines compared with fir and pine. Experimental results in the tapered bed were also compared with those of non-tapered geometry where a 10%-20% increase in heat transfer was observed. (C) 2018 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.