Effect of Maleic Anhydride (MA) on Properties of Recycled High Density Polyethylene/Ethylene Vinyl Acetate/Egg Shell Powder (rHDPE/EVA/ESP) Composites

被引：2
作者：
Farahana, R. N. [1 ]
Supri, A. G. [1 ]
Teh, P. L. [1 ]
机构：
[1] Univ Malaysia Perlis, Sch Mat Engn, Jejawi 02600, Perlis, Malaysia
来源：
MECHANICAL AND MATERIALS ENGINEERING | 2014年 / 554卷
关键词：
Composites; Eggshell; Recycled high density polyethylene; Ethylene vinyl acetate;
D O I：
10.4028/www.scientific.net/AMM.554.91
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The difference in polarity of recycled high density polyethylene (rHDPE) and ethylene vinyl acetate (EVA) blends leads to poor mechanical properties (Atul Rajan, 2013). Present works aim at finding the effects of maleic anhydride on the mechanical, morphological, and water resistance properties of rHDPE/EVA/ESP blends. It is shown that there is a significant improvement on tensile strength, interfacial adhesion between components, and water absorption resistance of adding maleic anhydride (MA) to rHDPE/EVA/ESP blends. This study may suggest that the MA can act as compatibilizer to enhance the interfacial interaction between the rHDPE and EVA matrix in the rHDPE/EVA/ESP composites.
引用
收藏
页码：91 / 95
页数：5
相关论文
共 10 条
  • [1] Abdullah A.H., 2011, J BAS RES SCI, V37, P36
  • [2] Effect of stabilizer on the mechanical, morphological and thermal properties of compatibilized high density polyethylene/ethylene vinyl acetate copolymer/organoclay nanocomposites
    Akhlaghi, Shahin
    Sharif, Alireza
    Kalaee, Mohammadreza
    Elahi, Alireza
    Pirzadeh, Mohammadhadi
    Mazinani, Saeedeh
    Afshari, Mehdi
    [J]. MATERIALS & DESIGN, 2012, 33 : 273 - 283
  • [3] Rheological and Mechanical Characteristics of Low Density Polyethylene/Ethylene-Vinyl Acetate/Organoclay Nanocomposites
    Behradfar, Afsoon
    Shojaei, Akbar
    Sheikh, Nasrin
    [J]. POLYMER ENGINEERING AND SCIENCE, 2010, 50 (07) : 1315 - 1325
  • [4] Crystallization of partially miscible linear low-density polyethylene/poly(ethylene-co-vinylacetate) blends
    Li, CX
    Kong, QS
    Zhao, J
    Zhao, DL
    Fan, QR
    Xia, YZ
    [J]. MATERIALS LETTERS, 2004, 58 (27-28) : 3613 - 3617
  • [5] Thermal and mechanical properties of injection molded recycled high density polyethylene blends with virgin isotactic polypropylene
    Madi, N. K.
    [J]. MATERIALS & DESIGN, 2013, 46 : 435 - 441
  • [6] Rajan Atul, 2013, INT J MECH IND ENG I, V3
  • [7] Tensile behavior of post-consumer recycled high-density polyethylene at different strain rates
    Reis, J. M. L.
    Pacheco, L. J.
    da Costa Mattos, H. S.
    [J]. POLYMER TESTING, 2013, 32 (02) : 338 - 342
  • [8] Shuhadah S., 2008, THERM AN WAT ABS MOR, P15
  • [9] Effect of Polyethylene-Grafted Maleic Anhydride (PE-g-MAH) on Properties of Low Density Polyethylene/Eggshell Powder (LDPE/ESP) Composites
    Supri, A. G.
    Ismail, H.
    Shuhadah, S.
    [J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (04) : 347 - 353
  • [10] Mechanical and morphological studies of poly(propylene)-filled eggshell composites
    Toro, Patricio
    Quijada, Raul
    Arias, Jose Luis
    Yazdani-Pedram, Mehrdad
    [J]. MACROMOLECULAR MATERIALS AND ENGINEERING, 2007, 292 (09) : 1027 - 1034
1