Analytical identification of the principal screws of the third order screw system

被引：20

作者：

Fang, YF ^{[1
]}

Huang, Z

机构：

[1] No Jiaotong Univ, Dept Engn Mech, Beijing, Peoples R China

[2] Yanshan Univ, Ctr Robot Res, Qinhuangdao, Hebei, Peoples R China

来源：

MECHANISM AND MACHINE THEORY | 1998年 / 33卷 / 07期

基金：

中国国家自然科学基金;

关键词：

D O I：

10.1016/S0094-114X(97)00090-6

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Screw theory, as a theoretical tool, plays an important role in the kinematic analysis of mechanisms and robot manipulators. The principal screws are the basic and important elements of the screw system. In robotics practice, the twist of an end-effector is easily obtained by the linear combination of the joint screws. However, the principal screws of the end-effector screw system are unknown. This paper presents an analytical method for identification of the principal screws in the third order screw system by using the conic section degenerating theory. The work presented in this paper is significant for further studies of the screw system. (C) 1998 Elsevier Science Ltd. All rights reserved.

引用

页码：987 / 992

页数：6

共 8 条

[1] Ball R.S., 1900, THEORY SCREWS
[2] HUANG Z, 1995, P IEEE C SMC VANC, P61
[3] Hunt K.H., 1978, KINEMATIC GEOMETRY M
[4] SPECIAL CONFIGURATIONS OF ROBOT-ARMS VIA SCREW THEORY
HUNT, KH
[J]. ROBOTICA, 1986, 4 : 171 - 179
[5] HUNT KH, 1983, T ASME, V105, P705
[6] THE ELLIPTIC POLARITY OF SCREWS
LIPKIN, H
DUFFY, J
[J]. JOURNAL OF MECHANISMS TRANSMISSIONS AND AUTOMATION IN DESIGN-TRANSACTIONS OF THE ASME, 1985, 107 (03): : 377 - 387
[7] LIPKIN H, 1988, T ASME, V110, P705
[8] A DIRECT DETERMINATION OF THE INSTANTANEOUS KINEMATICS OF FULLY PARALLEL ROBOT MANIPULATORS
MOHAMED, MG
DUFFY, J
[J]. JOURNAL OF MECHANISMS TRANSMISSIONS AND AUTOMATION IN DESIGN-TRANSACTIONS OF THE ASME, 1985, 107 (02): : 226 - 229

← 1 →