Numerical procedure for residual stresses prediction in friction stir welding

被引：57

作者：

Buffa, G. ^{[1
]}

Ducato, A. ^{[1
]}

Fratini, L. ^{[1
]}

机构：

[1] Univ Palermo, Dipartimento Tecnol Meccan Prod & Ingn Gestionale, I-90128 Palermo, Italy

来源：

FINITE ELEMENTS IN ANALYSIS AND DESIGN | 2011年 / 47卷 / 04期

关键词：

Friction stir welding; Residual stresses; FEM; MECHANICAL-PROPERTIES; ALUMINUM; JOINTS; MICROSTRUCTURE; MODEL;

D O I：

10.1016/j.finel.2010.12.018

中图分类号：

O29 [应用数学];

学科分类号：

070104 ;

摘要：

The prediction of residual stresses is a relevant and, under many points of view, still open issue for a proper welding process design. In the present paper a 3D FE model, with general validity for different joint configurations, was used to simulate the Friction Stir Welding (FSW) process of butt joints through a single block approach. The model is able to predict the residual stresses by considering thermal actions only, thanks to a new time efficient approach. A good agreement between calculated and experimentally measured data was found; the effectiveness of the presented numerical procedure was evaluated by comparing the calculation times of the proposed method with the ones of already known FE approaches. (C) 2010 Elsevier B.V. All rights reserved.

引用

收藏

页码：470 / 476

页数：7

相关论文

共 25 条

[1] Friction model for friction stir welding process simulation: Calibrations from welding experiments [J].

Assidi, Mohamed ;

Fourment, Lionel ;

Guerdoux, Simon ;

Nelson, Tracy .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (02) :143-155

[2] On the thermo-mechanical loads and the resultant residual stresses in friction stir processing operations [J].

Buffa, G. ;

Fratini, L. ;

Pasta, S. ;

Shivpuri, R. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2008, 57 (01) :287-290

[3] A continuum based FEM model for friction stir welding - model development [J].

Buffa, G ;

Hua, J ;

Shivpuri, R ;

Fratini, L .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 419 (1-2) :389-396

[4] The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints [J].

Bussu, G ;

Irving, PE .

INTERNATIONAL JOURNAL OF FATIGUE, 2003, 25 (01) :77-88

[5]

Chao Y.J., 2008, Transaction of The American Society of Mechanical Engineers, V105, P138

[6] Thermomechanical modelling and force analysis of friction stir welding by the finite element method [J].

Chen, C ;

Kovacevic, R .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2004, 218 (05) :509-519

[7]

*DEFORM, 2003, DEF 3D US MAN

[8] Fatigue crack growth in 2024-T351 friction stir welded joints: Longitudinal residual stress and microstructural effects [J].

Fratini, L. ;

Pasta, S. ;

Reynolds, A. P. .

INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (03) :495-500

[9] Residual stresses and FCP prediction in FSW through a continuous FE model [J].

Fratini, Livan ;

Macaluso, Gandolfo ;

Pasta, Salvatore .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (15-16) :5465-5474

[10] Flow patterns during friction stir welding [J].

Guerra, A ;

Schmidt, C ;

McClure, JC ;

Murr, LE ;

Nunes, AC .

MATERIALS CHARACTERIZATION, 2002, 49 (02) :95-101