Natural Fiber Incorporated Polymer Matrix Composites for Electronic Circuit Board Applications

被引：15

作者：

Chandrika, V. S. ^{[1
]}

Anamika, A. ^{[2
]}

Jeeva, C. ^{[3
]}

Perumal, Bhagavathi ^{[4
]}

Kumar, S. Sanal ^{[5
]}

Roseline, J. Femila ^{[6
]}

Raghavan, Ishwarya Komalnu ^{[7
]}

机构：

[1] KPR Inst Engn & Technol, Dept Elect & Elect Engn, Coimabatore 641407, Tamil Nadu, India

[2] Galgotias Coll Engn & Technol, Dept Elect & Elect Engn, Greater Noida 201310, India

[3] Sri Sairam Engn Coll, Dept Elect & Elect Engn, Chennai 600044, Tamil Nadu, India

[4] Sri Sairam Engn Coll, Dept Civil Engn, Chennai 600044, Tamil Nadu, India

[5] NSS Coll Nemmara, Dept Instrumentat, Palakkad, India

[6] Saveetha Univ, Saveetha Sch Engn, Dept Elect & Commun Engn, SIMTAS, Chennai, Tamil Nadu, India

[7] Hawassa Univ, Inst Technol, Fac Mfg, Dept Electromech Engn, Hawassa, Ethiopia

来源：

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING | 2022年 / 2022卷

关键词：

MECHANICAL-PROPERTIES; WATER-ABSORPTION; BEHAVIOR;

D O I：

10.1155/2022/3035169

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

There are many more applications for fibre-reinforced epoxy composites than there are for metals and alloys today. For example, sustainable, recyclable, and biodegradable reinforcements have been used in numerous studies to improve the mechanical and thermal properties of composite materials. It was discovered that the properties of epoxy-based composites could be improved by combining biosolid waste sugarcane bagasse ash fillers, madar fibre, and epoxy resin. Conventional compression molding techniques were used to prepare the sugarcane bagasse ash (SBA) particles and madar fibre-reinforced epoxy resin-based composites (PMCs), which were loaded with varying amounts of fibre and fillers. Hybrid biocomposites were evaluated for mechanical (tensile, flexural, impact, and hardness) and water absorption characteristics. Epoxy matrix composites containing 28 wt.% madar fibre and 7 wt.% sugarcane bagasse ash fillers had tensile, flexural, hardness, and impact values of 61 MPa, 147 MPa, and 54 kJ/m(2), respectively.

引用

页数：9

共 18 条

[1] Effect of water absorption on the mechanical properties of nano-filler reinforced epoxy nanocomposites [J].

Alamri, H. ;

Low, I. M. .

MATERIALS & DESIGN, 2012, 42 :214-222

[2]

[Anonymous], 1994, HDB POLYM FIBER COMP

[3]

AthijayamaniWinowlin MTSS., 2008, Int J Comput Aided Eng Technol, V1, P58

[4] Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles [J].

Essabir, H. ;

Hilali, E. ;

Elgharad, A. ;

El Minor, H. ;

Imad, A. ;

Elamraoui, A. ;

Al Gaoudi, O. .

MATERIALS & DESIGN, 2013, 49 :442-448

[5]

Ganesh B. Nagaraja, 2013, International Journal of Innovation and Applied Studies, V2, P645

[6] Effects of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fibre [J].

George, J ;

Bhagawan, SS ;

Thomas, S .

COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (09) :1471-1485

[7] Mechanical properties of basalt fibers and their adhesion to polypropylene matrices [J].

Greco, Antonio ;

Maffezzoli, Alfonso ;

Casciaro, Giovanni ;

Caretto, Flavio .

COMPOSITES PART B-ENGINEERING, 2014, 67 :233-238

[8]

Herrera-Franco P.J., 2007, COMPOS PART B-ENG, V36, p597 608, DOI [10.1016/j.compositesb.2005.04.0012-s2.0-23944476198, DOI 10.1016/J.COMPOSITESB.2005.04.0012-S2.0-23944476198]

[9] Curing characteristics and mechanical properties of rattan-powder-filled natural rubber composites as a function of filler loading and silane coupling agent [J].

Ismail, H. ;

Othman, N. ;

Komethi, M. .

JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 123 (05) :2805-2811

[10] Influence of Stacking Sequence and Fiber Content on the Mechanical Properties of Natural and Synthetic Fibers Reinforced Penta-Layered Hybrid Composites [J].

Mohanavel, V ;

Kumar, S. Suresh ;

Vairamuthu, J. ;

Ganeshan, P. ;

NagarajaGanesh, B. .

JOURNAL OF NATURAL FIBERS, 2022, 19 (13) :5258-5270

← 1 2 →