Experimental Study on Temperature Separation in Vortex Chamber

被引：5
作者：
Matsuo, Shigeru [1 ]
Matsuno, Yuhi [2 ]
Fukushima, Yusuke [2 ]
Mamun, Mohammad [3 ]
Hashimoto, Tokitada [1 ]
Setoguchi, Toshiaki [4 ]
Kim, Heuy Dong [5 ]
机构：
[1] Saga Univ, Dept Adv Technol Fus, 1 Honjo Machi, Saga 8408502, Japan
[2] Saga Univ, Grad Sch Sci & Engn, Saga 8408502, Japan
[3] Bangladesh Univ Engn & Technol, Dept Mech Engn, Dhaka 1000, Bangladesh
[4] Saga Univ, Inst Ocean Energy, Saga, Saga 8408502, Japan
[5] Andong Natl Univ, Sch Mech Engn, Andong 760749, South Korea
来源：
6th BSME International Conference on Thermal Engineering | 2015年 / 105卷
关键词：
Vortex chamber; temperature separation; cavity flow; compressible flow; oscillation;
D O I：
10.1016/j.proeng.2015.05.073
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
It is known in the previous researches that the swirl flow in circular pipe causes the temperature separation. Recently, it is shown that the temperature separation occurs in a chamber composed by cylindrical vortex chamber, tangential pipe, the central rod and discharge collector. In this device, high and low temperature regions occur in a cavity on the circumference of the chamber and center in vortex chamber, respectively. The highest temperature was observed in the bottom of the cavity. Therefore, it is expected that this device can be used as a heat source in the engineering field. In recent researches, the mechanism of temperature separation in the vortex chamber has been investigated experimentally and numerically by some researchers. However, there are few researches for the effect of configuration and position of the cavity on the temperature separation. In the present study, the effects of configuration of vortex chamber including a cavity and cavity position on temperature separation in the vortex chamber were investigated experimentally. (C) 2015 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：464 / 471
页数：8
相关论文
共 7 条
1