Fabrication of porous Al alloy coatings by cold gas dynamic spray process

被引：10

作者：

Lee, H. ^{[1
]}

Ko, K. ^{[1
]}

机构：

[1] Ajou Univ, Dept Mat Sci & Engn, Suwon 443749, South Korea

来源：

SURFACE ENGINEERING | 2010年 / 26卷 / 06期

关键词：

Alloy; Coatings; Diffusion; Annealing; LARGE POWDER PARTICLES; AL-AL2O3; COATINGS; ALUMINUM COATINGS; KINETIC SPRAY; DEPOSITION; AL2O3;

D O I：

10.1179/026708409X12490360426124

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Al alloy coatings (Al-Mg binary) were prepared by cold gas dynamic spray and characteristics of the porous Al alloy coatings were examined after post-annealing. The coatings of composites (Al-Mg and Al-AlMg) were annealed in a nitrogen atmosphere for four hours. Post-annealing caused Mg in the coatings to diffuse into the Al matrix by eutectic reaction between Al and Mg. For Al/AlMg multicoatings, porous layers in the coatings were formed by post-annealing (diffusion of Mg into the Al matrix). Therefore, processing parameters such as particles and coating method can be used for controlling the size and distribution of pores in cold sprayed coatings.

引用

页码：395 / 398

页数：4

共 18 条

[1] Integrated characterization of cold sprayed aluminum coatings [J].

Choi, W. B. ;

Li, L. ;

Luzin, V. ;

Neiser, R. ;

Gnaupel-Herold, T. ;

Prask, H. J. ;

Sampath, S. ;

Gouldstone, A. .

ACTA MATERIALIA, 2007, 55 (03) :857-866

[2] Gas dynamic principles of cold spray [J].

Dykhuizen, RC ;

Smith, MF .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1998, 7 (02) :205-212

[3] Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray [J].

Lee, HY ;

Jung, SH ;

Lee, SY ;

You, YH ;

Ko, KH .

APPLIED SURFACE SCIENCE, 2005, 252 (05) :1891-1898

[4] Cold spray of SiC and Al2O3 with soft metal incorporation:: A technical contribution [J].

Lee, HY ;

Yu, YH ;

Lee, YC ;

Hong, YP ;

Ko, KH .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2004, 13 (02) :184-189

[5] Interfacial studies between cold-sprayedWO3, Y2O3 films and Si substrate [J].

Lee, HY ;

Yu, YH ;

Lee, YC ;

Hong, YP ;

Ko, KH .

APPLIED SURFACE SCIENCE, 2004, 227 (1-4) :244-249

[6] Deposition characteristics of Al-12Si alloy coating fabricated by cold spraying with relatively large powder particles [J].

Li, W.-Y. ;

Zhang, C. ;

Guo, X. P. ;

Zhang, G. ;

Liao, H. L. ;

Coddet, C. .

APPLIED SURFACE SCIENCE, 2007, 253 (17) :7124-7130

[7]

MAEV RG, 2006, P INT C THERM SPRAY

[8] Effect of grinding on the erosion behaviour of a WC-Co-Cr coating deposited by HVOF and detonation gun spray processes [J].

Murthy, JKN ;

Rao, DS ;

Venkataraman, B .

WEAR, 2001, 249 (07) :592-600

[9] Cold spraying of Al-Snbinary alloy: Coating characteristics and particle bonding features [J].

Ning, Xian-Jin ;

Jang, Jae-Hoon ;

Kim, Hyung-Jun ;

Li, Chang-Jiu ;

Lee, Changhee .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (09) :1681-1687

[10] Formation of TiAl intermetallics by heat treatment of cold-sprayed precursor deposits [J].

Novoselova, T. ;

Celotto, S. ;

Morgan, R. ;

Fox, P. ;

O'Neill, W. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 436 (1-2) :69-77

← 1 2 →