Comparative study on tensile properties and microstructure development in elastomer-modified cyclic olefin copolymer

被引：6

作者：

Jafari, Seyed Hassan ^{[1
]}

Khonakdar, Hossein Ali ^{[2
,3
]}

Tarameshlou, Mohammad ^{[1
]}

Saeb, Mohammad Reza ^{[4
]}

机构：

[1] Univ Tehran, Sch Chem Engn, Coll Engn, POB 11155-4563, Tehran, Iran

[2] Leibniz Inst Polymer Res Dresden, Hohe Str 6, D-01062 Dresden, Germany

[3] IPPI, Dept Polymer Proc, POB 14965-115, Tehran, Iran

[4] Inst Color Sci & Technol, Dept Resin & Addit, POB 16765-654, Tehran, Iran

来源：

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY | 2016年 / 22卷 / 03期

关键词：

VINYL-ACETATE COPOLYMER; MECHANICAL-PROPERTIES; POLYMER BLENDS; POLY(BUTYLENE TEREPHTHALATE); MORPHOLOGY; COC; POLYETHYLENE; BEHAVIOR;

D O I：

10.1002/vnl.21419

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

Mechanical and morphological properties of blends of cyclic olefin copolymer (COC) with polyolefin-octane copolymer (POE) and polyethylene-vinyl acetate (EVA), as the second phase, are thoroughly discussed over full composition range. Scanning electron microscopy revealed that both the systems are immiscible pairs showing biphasic morphology; however, co-continuity was seen upon varying composition. The mechanical characteristics, tensile modulus, yield strength, tensile strength, and elongation at break were evaluated varying blend composition. It was found that addition of POE to COC results in a higher decrease in tensile modulus when compared to COC/EVA pair. Mechanical results were correlated with several theoretical models and the best model for estimating tensile modulus was determined. Among examined models, the best fitting to experimental data for both series of the blends was provided by the Lyngaae-Jorgensen model. J. VINYL ADDIT. TECHNOL., 22:222-230, 2016. (c) 2014 Society of Plastics Engineers

引用

页码：222 / 230

页数：9

共 50 条

[21] Evaluation of the stabilizing effect and ageing time indicator properties of poly(flavonoids) in a cyclic olefin copolymer [J].

Latos-Brozio, Malgorzata ;

Milczarek, Katarzyna ;

Masek, Anna .

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2024, 149 (17) :9261-9274

[22] Cyclic olefin copolymer/layered silicate nanocomposite: solid and melt viscoelastic properties and degradation behavior [J].

Jafari, Seyed Hassan ;

Hesabi, Mohammad-Nabi ;

Khonakdar, Hosein Ali ;

Asadinezhad, Ahmad .

JOURNAL OF POLYMER RESEARCH, 2012, 19 (07)

[23] Effects of temperature and clay content on water absorption characteristics of modified MMT clay/cyclic olefin copolymer nanocomposite films: Permeability, dynamic mechanical properties and the encapsulated organic device performance [J].

Saravanan, S. ;

Ramamurthy, Praveen C. ;

Madras, Giridhar .

COMPOSITES PART B-ENGINEERING, 2015, 73 :1-9

[24] Study on the Mechanical Properties, Tensile Performance, Hydration Heat, and Microstructure of VAE-Modified Rubber Mortar [J].

Zhang, Jiaming ;

Bian, Ce ;

Chen, Bowen ;

Li, Chunhe ;

Wei, Hua ;

Lu, Hao .

MATERIALS, 2025, 18 (03)

[25] Comparative study of tensile properties and impact toughness of duplex lightweight steel [J].

Yang, Junha ;

Lee, Hyun Wook ;

Park, Tak Min ;

Lee, Sukjin ;

Han, Jeongho .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 914

[26] A Comparative Study of the Microstructure and Mechanical Properties of α plus β Titanium Alloys [J].

Li, C. ;

Chen, J. H. ;

Wu, X. ;

van der Zwaag, S. .

METAL SCIENCE AND HEAT TREATMENT, 2014, 56 (7-8) :374-380

[27] Comparative Study of Microstructure, Mechanical and Reciprocating Wear Properties of Unmodified and Sr-Modified A383 Alloy and Composite [J].

Prasad, Palaparthi Hari Durga ;

Radhika, N. .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2020, 73 (07) :1939-1950

[28] Investigations on the optical and mechanical properties of cyclo-olefin copolymer blends and the effects of modified nanosilica particles [J].

Shiao, Po-Ling ;

Yang, Jian-He ;

Chou, Yu-Sheng ;

Lai, Mei-Chun ;

Lee, Yu-Der .

MATERIALS CHEMISTRY AND PHYSICS, 2013, 141 (2-3) :694-704

[29] Study on microstructure and tensile properties of 316L stainless steel fabricated by CMT wire and arc additive manufacturing [J].

Wang, C. ;

Liu, T. G. ;

Zhu, P. ;

Lu, Y. H. ;

Shoji, T. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 796

[30] Assessment of microstructure, physical and thermal properties of bitumen modified with LDPE/GTR/elastomer ternary blends [J].

Formela, Krzysztof ;

Sulkowski, Michal ;

Saeb, Mohammad Reza ;

Colom, Xavier ;

Haponiuk, Jozef T. .

CONSTRUCTION AND BUILDING MATERIALS, 2016, 106 :160-167

← 1 2 3 4 5 →