Performance of oil palm empty fruit bunch fibres coated with acrylonitrile butadiene styrene

被引：16

作者：

Bateni, Farshid ^{[1
]}

Ahmad, Fauziah ^{[1
]}

Yahya, Ahmad Shukri ^{[1
]}

Azmi, Mastura ^{[1
]}

机构：

[1] Univ Sains Malaysia, Sch Civil Engn, Nibong Tebal 14300, Penang, Malaysia

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2011年 / 25卷 / 04期

关键词：

Coating; Fibres; Environmental degradation; Soil reinforcement; PHENOL-FORMALDEHYDE COMPOSITES; MECHANICAL-PROPERTIES; SURFACE MODIFICATION; WATER-SORPTION; SISAL FIBER; STRENGTH; BEHAVIOR; SAND; CLAY;

D O I：

10.1016/j.conbuildmat.2010.11.080

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Natural fibres are suitable for reinforcement of soils due to their availability, low cost and environment-friendly nature. Oil palm empty fruit bunches (OPEFB), solid waste produced during refinement of oil from oil palm fruit, provide fibres which have been used as reinforcement material for soil improvements. To protect the fibres from biodegrading in reinforced soil, OPEFB fibre is coated with non-biodegradable material. The effect of coating OPEFB fibres with acrylonitrile butadiene styrene (ABS) was evaluated. Morphological characterization, mechanical and physical properties of the coated fibres exhibited improved fibre performance. The ABS treatment protected fibres from water absorption and decreased the biodegradation potential of the fibres in contact with soil. The tensile strength and elasticity moduli of the OPEFB fibres were also improved with the coating. Coating fibres increases interface friction between fibre and soil particles due to increased surface area. The results were shown that the shear strength parameters of the fibre-reinforced soils can be improved significantly. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：1824 / 1829

页数：6

共 22 条

[1] Performance evaluation of silty sand reinforced with fibres [J].

Ahmad, Fauziah ;

Bateni, Farshid ;

Azmi, Mastura .

GEOTEXTILES AND GEOMEMBRANES, 2010, 28 (01) :93-99

[2]

*AUT CREAT INC, 2010, MATWEB OV ACR BUT ST

[3] Spatial effects in the photodegradation of poly(acrylonitrile-butadiene-styrene): a study by ATR-FTIR [J].

Bokria, JG ;

Schlick, S .

POLYMER, 2002, 43 (11) :3239-3246

[4] On adhesion mechanisms and interfacial strength in acrylonitrile-butadiene-styrene/wood sawdust composites [J].

Chotirat, L. ;

Chaochancbaikul, K. ;

Sombatsompop, N. .

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2007, 27 (08) :669-678

[5] Clay-based composite stabilized with natural polymer and fibre [J].

Galan-Marin, C. ;

Rivera-Gomez, C. ;

Petric, J. .

CONSTRUCTION AND BUILDING MATERIALS, 2010, 24 (08) :1462-1468

[6] BEHAVIOR OF FABRIC-REINFORCED VERSUS FIBER-REINFORCED SAND [J].

GRAY, DH ;

ALREFEAI, T .

JOURNAL OF GEOTECHNICAL ENGINEERING-ASCE, 1986, 112 (08) :804-820

[7] MECHANICS OF FIBER REINFORCEMENT IN SAND [J].

GRAY, DH ;

OHASHI, H .

JOURNAL OF GEOTECHNICAL ENGINEERING-ASCE, 1983, 109 (03) :335-353

[8] The effect of attached fragments on dense layer of electroless Ni/P deposition on the electromagnetic interference shielding effectiveness of carbon fibre/acrylonitrile-butadiene-styrene composites [J].

Huang, CY ;

Mo, WW .

SURFACE & COATINGS TECHNOLOGY, 2002, 154 (01) :55-62

[9] Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites [J].

Jacob, M ;

Thomas, S ;

Varughese, KT .

COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (7-8) :955-965

[10] Compressive strength of fiber reinforced highly compressible clay [J].

Kumar, Arvind ;

Walia, Baljit Singh ;

Mohan, Jatinder .

CONSTRUCTION AND BUILDING MATERIALS, 2006, 20 (10) :1063-1068

← 1 2 3 →