The mechanical parameters modeling of heavy steel plate snake/gradient temperature rolling with the same roll diameters

被引:15
作者
Jiang, Lian-Yun [1 ]
Zhen, Tao [1 ]
Yuan, Guo [2 ]
Huang, Jin-Bo [1 ]
Wei, Yao-Yu [1 ]
Li, Heng [1 ]
Wang, Ping [1 ]
机构
[1] Taiyuan Univ Sci & Technol, Sch Mech Engn, Taiyuan 030024, Peoples R China
[2] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China
基金
中国国家自然科学基金;
关键词
heavy steel plate; snake; gradient temperature rolling; slab method; rolling force; rolling torque; SLAB ANALYSIS; MICROSTRUCTURE; DEFORMATION; STRENGTH; SHEETS; FORCE;
D O I
10.1051/metal/2020019
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The grains in the center of the heavy steel plate can be refined by the snake/gradient temperature rolling, and the deformation penetration, the microstructure, and the properties of the steel plate will be improved. The existing rolling mechanical models are not suitable for the snake/gradient temperature rolling, so it is necessary to establish the mechanical parameters model of the snake/gradient temperature rolling to instruct production. The yield criterion of rolled material was modified based on the idea of equivalent flow stress. The element stress analyses were carried out based on the uniform normal stress and nonuniform shear stress in the vertical sides of each slab. Then the equilibrium equation of the unit pressure based on the slab method was established on this basis. The deformation region was divided into three layers (the top layer, the bottom layer, and the central layer) and maximum four zones (back slip zone, front slip zone, cross shear zone, and reverse deflection zone) according to the temperature distribution and position of the neutral point, and then the 12 zones were formed during the snake/gradient temperature rolling. The boundary conditions of the existence of the back slip zone, the front slip zone, and the cross shear zone were established according to the relationship between the threading angle and the neutral angle. The accurate mechanical parameters model of the rolling force and rolling torque of the snake/gradient temperature rolling with the same roll diameters was set up on this basis. The ANSYS software has been used in the rolling process simulation by many scholars, and the calculating precision has been verified. So the rolling processes were simulated by the ANSYS software to validate the model precision. The results show that the maximum relative deviation of the rolling force analytic model is less than 7% compared with the numerical method, and the maximum relative deviation of the rolling torque analytic model is less than 11% compared with the measured results. The mechanical parameters model can accurately predict the rolling force and rolling torque during the snake/gradient temperature rolling with the same roll diameters, so as to provide a theoretical basis for the design of rolling mill and the setup of the process parameters.
引用
收藏
页数:12
相关论文
共 28 条
  • [1] An analytical model of asymmetric rolling of unbounded clad sheets with shear effects
    Afrouz, F.
    Parvizi, A.
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2015, 20 : 162 - 171
  • [2] Central infiltrated performance of deformation in ultra-heavy plate rolling with large deformation resistance gradient
    Ding, JingGuo
    Zhao, Zhong
    Jiao, ZhiJie
    Wang, Jun
    [J]. APPLIED THERMAL ENGINEERING, 2016, 98 : 29 - 38
  • [3] Analysis of Hot Tandem Rolling Force with Logarithmic Velocity Field and EA Yield Criterion
    Gao, Jian-zhao
    Zhao, De-wen
    Zhang, Shun-hu
    Peng, Wen
    Chen, Shu-zong
    Zhang, Dian-hua
    [J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2014, 21 (03) : 295 - 299
  • [4] Huang C. Q., 2011, PROCEDIA ENG, V16, P745
  • [5] Jiang L., 2016, METALLURGICAL RES TE, V113, P1
  • [6] Jiang L.Y., 2018, MATH PROBL ENG, P1
  • [7] Effect of gradient temperature rolling (GTR) and cooling on microstructure and properties of E40-grade heavy plate
    Li Gaosheng
    Yu Wei
    Cai Qingwu
    He, Ziyang
    [J]. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2017, 17 (01) : 121 - 131
  • [8] Investigation of the Evolution of Central Defects in Ultra-Heavy Plate Rolled Using Gradient Temperature Process
    Li Gaosheng
    Yu Wei
    Cai Qingwu
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2015, 46 (02): : 831 - 840
  • [9] [李高盛 Li Gaosheng], 2014, [北京科技大学学报, Journal of University Science and Technology Beijing], V36, P1322
  • [10] Microstructure, texture andmechanical properties of AA1060 aluminum plate processed by snake rolling
    Li, Saiyi
    Qin, Nan
    Liu, Jie
    Zhang, Xinming
    [J]. MATERIALS & DESIGN, 2016, 90 : 1010 - 1017