Bolt fatigue in CFRP joints

被引：14

作者：

Kapidzic, Zlatan ^{[1
,2
]}

Granados, Diego Leonardo avila ^{[3
,4
]}

Arias, Javier Andres Moreno ^{[4
]}

Aguilera, Manuel Jesus Quiroga ^{[4
]}

Rodriguez, Juan Pablo Casas ^{[5
]}

Callejas, Juan Carlos Garcia ^{[5
]}

机构：

[1] Saab AB, SE-58188 Linkoping, Sweden

[2] Linkoping Univ, Div Solid Mech, SE-58183 Linkoping, Sweden

[3] Fdn Univ Libertadores, Engn Dept, Cra 16 63 A 68, Bogota, Colombia

[4] Corp Ind Aeronaut Colombiana, Cll 26 103-08 Ent 1 Int 2, Bogota, Colombia

[5] Univ Andes, Mechanicaltemp Engn Dept, Cra 1a Este 19 A 40, Bogota, Colombia

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2022年 / 164卷

关键词：

Bolt fatigue; Liquid shim; CFRP joint; Friction; MECHANICALLY FASTENED JOINTS; SPECTRUM FATIGUE; COMPOSITE JOINTS; RESISTANCE; STRENGTH;

D O I：

10.1016/j.ijfatigue.2022.107138

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Bending of titanium bolts in in-plane loaded composite joints is potentially fatigue critical. We propose an analytical model for calculation of bending stress in protruding and countersunk-head bolts in composite joints. The model allows for presence of liquid shim and considers the load transfer by friction. We perform experiments on six types of joints, including variants with and without liquid shim or frictionless tape between the plates, and with different levels of bolt pretension. Using the bending stress, we fit an S-N equation to the test results and compare predictions of variable-amplitude fatigue life to experimental results from the literature.

引用

页数：15

共 35 条

[1] Shakedown in frictional contact of discrete elastic systems: A review [J].

Ahn, Young Ju ;

Klarbring, Anders ;

Spagnoli, Andrea ;

Terzano, Michele .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2022, 241

[2]

[Anonymous], 2001, 98012 ESDU

[3]

[Anonymous], 2017, E104985 ASTM

[4]

[Anonymous], 1996, 33811996 EN

[5]

[Anonymous], 2006, 44952006 EN

[6]

[Anonymous], Technical Data Sheet Rev 1. Conductive PLA

[7]

[Anonymous], 2001, EN 3723:2001 Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel, FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/425 C. Standard

[8]

Barbero EJ, 2013, FINITE ELEM ANAL DES, DOI [10.1201/b14788, DOI 10.1201/B14788]

[9] STRESSES AND DISPLACEMENTS DUE TO LOAD-TRANSFER BY FASTENERS IN STRUCTURAL ASSEMBLIES [J].

BARROIS, W .

ENGINEERING FRACTURE MECHANICS, 1978, 10 (01) :115-176

[10]

Bowker A.H., 1959, Engineering Statistics

← 1 2 3 4 →