Organoclay localization in polyamide 6/ethylene-butene copolymer grafted maleic anhydride blends: the effect of different types of organoclay

Localization of organoclays between two phases of polyamide 6 (PA6)/maleic anhydride grafted ethylene-butene copolymer (EB-g-MAH) blends, prepared via melt mixing, was investigated as a function of organoclay type. Cloisite 30B, Cloisite 20A and Cloisite 15A were used as different types of organoclay. The influence of different blend compositions and clay contents were also studied. Contact angle measurements have been applied to determine surface tension of components and then to calculate the wetting coefficient which is a useful parameter for prediction of the organoclay location. In general, all organoclays were found to locate in the more hydrophilic polyamide 6 phase. However, for Cloisite 20A and Cloisite 15A transmission electron microscopy (TEM) observations revealed some organoclay layers in the EB-g-MAH phase. Phase structure and nanocomposite morphology were evaluated using scanning and transmission electron microscopy and small angle X-ray scattering (SAXS). Results indicated the formation of an exfoliated or an intercalated morphology in different samples. Dynamic-mechanical thermal analysis and thermal gravimetric analysis were used as an experimental probe to confirm the location of nanoclays predicted via wetting coefficient. The shifting of glass transition temperature for PA6 phase confirmed that nanoclays are more distributed in this phase.