Effect of process parameters on hardness and microstructure of graphene reinforced titanium composites

被引：41

作者：

Gurbuz, Mevlut ^{[1
]}

Mutuk, Tugba ^{[2
]}

机构：

[1] Ondokuz Mayis Univ, Dept Mech Engn, TR-55139 Samsun, Turkey

[2] Ondokuz Mayis Univ, Dept Mat Sci & Engn, Samsun, Turkey

来源：

JOURNAL OF COMPOSITE MATERIALS | 2018年 / 52卷 / 04期

关键词：

Graphene; titanium; composites; sintering; microstructure; hardness; MECHANICAL-PROPERTIES; CARBON NANOTUBES; MATRIX; TEMPERATURE; BEHAVIOR;

D O I：

10.1177/0021998317745143

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

In this study, the effect of the sintering time, temperature and graphene amount on titanium properties was examined for the first time in detail. From the results, the highly dense (4.39g/cm(3)), most hard (from 390HV to 566HV) and improved microstructure for 0.15wt% graphene addition were performed at 1100? for 120min. The titanium composite properties have been reduced with increasing graphene due to damaged graphene and titanium carbide formation above 0.30wt% graphene. To summarise, when pure titanium is compared with graphene reinforced titanium composites, the properties enhanced due to dislocation and fine grain strengthening mechanisms.

引用

页码：543 / 551

页数：9

共 50 条

[31] Effect of SiC nanoparticle on microstructure and mechanical properties of graphene nanosheet (GNS) reinforced aluminum composites
Zhang, Jiajia
Zhang, Xuexi
Qian, Mingfang
Li, Aibin
Geng, Lin
JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 968
[32] Effect of carbide interlayers on the microstructure and properties of graphene-nanoplatelet-reinforced copper matrix composites
Si, Xiaoyang
Li, Mian
Chen, Fanyan
Eklund, Per
Xue, Jianming
Huang, Feng
Du, Shiyu
Huang, Qing
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 708 : 311 - 318
[33] Through Process Modeling Approach: Effect of Microstructure on Mechanical Properties of Fiber Reinforced Composites
Zaidani, Mouna
Omar, Mohammad Atif
Kumar, S.
MECHANICS OF COMPOSITE AND MULTIFUNCTIONAL MATERIALS, VOL 7, 2016, : 421 - 430
[34] Modeling and Optimization of the Effect of Sintering Parameters on the Hardness of Copper/Graphene Nanosheet Composites by Response Surface Methodology
Ponraj, N. Vijay
Azhagurajan, A.
Vettivel, S. C.
Shajan, X. Sahaya
Nabhiraj, P. Y.
Haiterlenin, A.
METAL SCIENCE AND HEAT TREATMENT, 2019, 60 (9-10) : 611 - 615
[35] Modeling and Optimization of the Effect of Sintering Parameters on the Hardness of Copper/Graphene Nanosheet Composites by Response Surface Methodology
N. Vijay Ponraj
A. Azhagurajan
S. C. Vettivel
X. Sahaya Shajan
P. Y. Nabhiraj
A. Haiterlenin
Metal Science and Heat Treatment, 2019, 60 : 611 - 615
[36] Effect of SPS Process on Tensile Properties of Graphene Nanosheet Reinforced Aluminum Matrix Composites
Zhao Shuangzan
Yan Shaojiu
Chen Xiang
Hong Qihu
Li Xiuhui
Dai Shenglong
RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (02) : 632 - 637
[37] Effect of SPS Process on Tensile Properties of Graphene Nanosheet Reinforced Aluminum Matrix Composites
Zhao, Shuangzan
Yan, Shaojiu
Chen, Xiang
Hong, Qihu
Li, Xiuhui
Dai, Shenglong
Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2019, 48 (02): : 632 - 637
[38] Microstructure and properties of high entropy alloy reinforced titanium matrix composites
Yuan, Zhanwei
Liu, Huan
Ma, Zhe
Ma, Xinkai
Wang, Kai
Zhang, Xuemin
MATERIALS CHARACTERIZATION, 2022, 187
[39] Microstructure and mechanical properties of SiC nanowires reinforced titanium matrix composites
Liu, Yue
Dong, Longlong
Lu, Jinwen
Huo, Wangtu
Du, Yan
Zhang, Wei
Zhang, Yusheng
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 819
[40] Microstructure and Mechanical Properties of Graphene Oxide-Reinforced Titanium Matrix Composites Synthesized by Hot-Pressed Sintering
Jingqi Liu
Ning Hu
Xuyang Liu
Yaolu Liu
Xuewei Lv
Liangxiao Wei
Shoutao Zheng
Nanoscale Research Letters, 2019, 14

← 1 2 3 4 5 →