Effect of process parameters on hardness and microstructure of graphene reinforced titanium composites

被引：41

作者：

Gurbuz, Mevlut ^{[1
]}

Mutuk, Tugba ^{[2
]}

机构：

[1] Ondokuz Mayis Univ, Dept Mech Engn, TR-55139 Samsun, Turkey

[2] Ondokuz Mayis Univ, Dept Mat Sci & Engn, Samsun, Turkey

来源：

JOURNAL OF COMPOSITE MATERIALS | 2018年 / 52卷 / 04期

关键词：

Graphene; titanium; composites; sintering; microstructure; hardness; MECHANICAL-PROPERTIES; CARBON NANOTUBES; MATRIX; TEMPERATURE; BEHAVIOR;

D O I：

10.1177/0021998317745143

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

In this study, the effect of the sintering time, temperature and graphene amount on titanium properties was examined for the first time in detail. From the results, the highly dense (4.39g/cm(3)), most hard (from 390HV to 566HV) and improved microstructure for 0.15wt% graphene addition were performed at 1100? for 120min. The titanium composite properties have been reduced with increasing graphene due to damaged graphene and titanium carbide formation above 0.30wt% graphene. To summarise, when pure titanium is compared with graphene reinforced titanium composites, the properties enhanced due to dislocation and fine grain strengthening mechanisms.

引用

页码：543 / 551

页数：9

共 50 条

[1] Effect of Shock Waves on the Hardness of Graphene Reinforced Aluminium Composites
Srinivasa, M. R.
Rammohan, Y. S.
Sadashiva, M.
Santhosh, N.
JOURNAL OF POLYMER & COMPOSITES, 2020, 8 (01) : 32 - 38
[2] Microstructure and Properties of Copper-plated Graphene Reinforced Titanium Matrix Composites
Luo J.
Xie J.
Xu J.
Deng L.
Cailiao Daobao/Materials Reports, 2021, 35 (22): : 22098 - 22103
[3] The effect of sintering time, temperature, and graphene addition on the hardness and microstructure of aluminum composites
Gurbuz, Mevlut
Senel, Mahmut Can
Koc, Erdem
JOURNAL OF COMPOSITE MATERIALS, 2018, 52 (04) : 553 - 563
[4] Microstructure and Properties of Titanium Matrix Composites Synergistically Reinforced by Graphene Oxide and Alloying Elements
Yu, Jiashi
Zhao, Yongqing
Zhao, Qinyang
Zhang, Wei
Huo, Wangtu
Zhang, Yusheng
ADVANCED ENGINEERING MATERIALS, 2023, 25 (05)
[5] Optimization of tribological process parameters of titanium carbide reinforced copper matrix composites
Ravichandran, M.
Alagarsamy, S., V
Dhinakaran, V
Samad, Mohammed Abdul
Katiyar, Jitendra Kumar
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2022, 236 (09) : 1737 - 1751
[6] Electrodeposition of FeW-graphene composites: Effect of graphene oxide concentration on microstructure, hardness and corrosion properties
Mulone, Antonio
Xia, Zhenyuan
Klement, Uta
FLATCHEM, 2023, 40
[7] Correlation between process parameters, microstructure and hardness of titanium nitride films by chemical vapor deposition
Cheng, HE
Wen, YW
SURFACE & COATINGS TECHNOLOGY, 2004, 179 (01): : 103 - 109
[8] The Effect of Sintering on the Microstructure, Hardness, and Tribological Behavior of Aluminum–Graphene Nanoplatelet Powder Composites
U. Çavdar
O. Akkurt
Powder Metallurgy and Metal Ceramics, 2018, 57 : 265 - 271
[9] Tailoring of interface reaction, microstructure and compressive properties of graphene reinforced titanium alloy matrix composites
Wang J.
Zhang F.
Shang C.
Zhang B.
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2020, 37 (12): : 3137 - 3148
[10] Microstructure and interface structures of graphene reinforced pure titanium matrix composites by hot pressed sintering
Zhang, Zaiyu
Liang, Yilong
Cao, Hongqun
Yang, Ming
MATERIALS RESEARCH EXPRESS, 2019, 6 (11)

← 1 2 3 4 5 →