MECHANICAL PROPERTIES OF ALUMINIUM BRACKET STRENGTHENING

被引：2
|
作者：
Ambroziak, A. [1 ]
机构：
[1] Gdansk Univ Technol, Fac Civil & Environm Engn, St Gabriela Narutowicza 11-12, PL-80233 Gdansk, Poland
来源：
ARCHIVES OF CIVIL ENGINEERING | 2019年 / 65卷 / 04期
关键词：
aluminium bracket; cover plates; mechanical properties; EN AW-6060 T66;
D O I：
10.2478/ace-2019-0055
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The aim of the research is laboratory investigation of aluminium brackets employed to fasten lightweight curtain walls to building facilities. Tensile loads perpendicular to end plates (vertical) were applied here. The author focused on the solutions intended to increase the load-carrying capacity of aluminium brackets applying the plain washer form A (DIN 125; ISO 7089), plain washer with an outer diameter about 3d (DIN 9021; ISO 7093) and additional cover plates (straps) in the location of bolt anchoring on the base plate. The aluminium brackets were tested on a steel base and concrete substrate. The flexibility of anchoring strongly affects the increase of the end plate middle point displacement and movable crosshead displacement.
引用
收藏
页码：203 / 216
页数：14
相关论文
共 50 条
  • [41] Mechanical properties and strengthening mechanisms in laser beam welds of pure titanium
    Liu, H.
    Nakata, K.
    Yamamoto, N.
    Liao, J.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2011, 16 (07) : 581 - 585
  • [42] The effect of aluminium content on the mechanical properties and microstructure of die cast binary magnesium-aluminium alloys
    Dargusch, Matthew S.
    Pettersen, Ketil
    Nogita, Kazuhiro
    Nave, Mark D.
    Dunlop, Gordon L.
    MATERIALS TRANSACTIONS, 2006, 47 (04) : 977 - 982
  • [43] Mechanical stir casting of aluminium alloys from the mushy state: process, microstructure and mechanical properties
    Brabazon, D
    Browne, DJ
    Carr, AJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 326 (02): : 370 - 381
  • [44] Mechanical properties of AA6061 aluminium alloy subjected to severe surface mechanical treatment
    Thirumavalavan, K.
    Karunamoorthy, L.
    Padmanabhan, K. A.
    MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
  • [45] The effect of preform processing on replicated aluminium foam structure and mechanical properties
    Goodall, R
    Despois, JF
    Marmottant, A
    Salvo, L
    Mortensen, A
    SCRIPTA MATERIALIA, 2006, 54 (12) : 2069 - 2073
  • [46] Assessment of mechanical properties of Silicon Carbide and Graphene reinforced aluminium composite
    Saravanan, C.
    Dinesh, S.
    Sakthivel, P.
    Vijayan, V.
    Kumar, B. Suresh
    MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 744 - 747
  • [47] A study of the mechanical properties and recrystallization of two types of foil of aluminium 1050 A
    Perez-Ilzarbe, J.
    Carrasquilla, J. Fernandez
    Perez, C. Luis
    MECHANICAL PROPERTIES OF SOLIDS XI, 2010, 423 : 137 - 145
  • [48] Enhancing mechanical properties of aluminium 6063 with crab shell particle reinforcement
    Owa, Adebayo Felix
    Olubambi, Peter Apata
    DISCOVER APPLIED SCIENCES, 2024, 6 (07)
  • [49] STRUCTURE AND MECHANICAL PROPERTIES OF VERTICAL UPWARDS CONTINUOUSLY CASTED ALUMINIUM WIRES
    Gavrilova, Rositsa V.
    Hadzhiyski, Viktor B.
    Mihovsky, Mihail K.
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2010, 10 (03): : 219 - 223
  • [50] Characterising the Mechanical Properties of a Composite Material Comprising Aluminium and Silicon Carbide
    Ekpu, Mathias
    Ikpeseni, Sunday C.
    SILICON, 2024, 16 (10) : 4333 - 4342
12345