Study on the formation of open-eye and slag entrainment in gas stirred ladle

被引:24
|
作者
Thunman, M. [1 ]
Eckert, S. [2 ]
Hennig, O. [2 ]
Bjorkvall, J. [3 ]
Sichen, Du [1 ]
机构
[1] Royal Inst Technol, Dept Mat Sci & Engn, S-10044 Stockholm, Sweden
[2] Forschungszentrum Dresden Rossendorf, Dept Magnetohydrodynam, D-01314 Dresden, Germany
[3] Met Res Inst AB, MEFOS, Dept Proc Met, Lulea, Sweden
关键词
cold model; inclusion; slag entrapment; Ga-In-Sn alloy; open-eye; steel-slag interface;
D O I
10.1002/srin.200706297
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Laboratory experiments were carried out to study the phenomena related to open-eye formation in ladle treatment. Ga-In-Sn alloy with a melting temperature of 283 K was used to simulate the liquid steel, while MgCl2-Glycerol(87%) solution as well as HCl solution were used to simulate the ladle slag. No open-eye was formed at lower gas flow rates, but, occurred when gas flow reached a critical rate. This critical gas flow rate was found to depend significantly on the height of the top liquid. No noticeable amount of top liquid was observed in any of the samples taken from the metal bulk during gas stirring. To confirm this aspect, samples of slag-metal interface were taken around the open-eye in an industrial gas stirred steel ladle. No entrapped slag droplet was found in the solidified steel within the region between the interface and 2 cm from the interface. The accordance of the laboratory and industrial results suggests that the entrainment of slag into the steel bulk around the open-eye cannot be considered as the major contribution to inclusion formation.
引用
收藏
页码:849 / 856
页数:8
相关论文
共 50 条
  • [1] Numerical Modeling of Open-Eye Formation and Mixing Time in Argon Stirred Industrial Ladle
    Ramasetti, Eshwar Kumar
    Visuri, Ville-Valtteri
    Sulasalmi, Petri
    Fabritius, Timo
    Saatio, Tommi
    Li, Mingming
    Shao, Lei
    METALS, 2019, 9 (08)
  • [2] Study of Open Eye Formation in an Argon Stirred Ladle
    Wu, L.
    Valentin, P.
    Sichen, D.
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (07) : 508 - 515
  • [3] Modeling of the Effect of the Gas Flow Rate on the Fluid Flow and Open-Eye Formation in a Water Model of a Steelmaking Ladle
    Ramasetti, Eshwar Kumar
    Visuri, Ville-Vaitteri
    Sulasalmi, Petri
    Mattila, Riku
    Fabritius, Timo
    STEEL RESEARCH INTERNATIONAL, 2019, 90 (02)
  • [4] Numerical Modelling of the Influence of Argon Flow Rate and Slag Layer Height on Open-Eye Formation in a 150 Ton Steelmaking Ladle
    Ramasetti, Eshwar Kumar
    Visuri, Ville-Valtteri
    Sulasalmi, Petri
    Fabritius, Timo
    Savolainen, Jari
    Li, Mingming
    Shao, Lei
    METALS, 2019, 9 (10)
  • [5] Numerical Simulation of Slag Eye Formation and Slag Entrapment in a Bottom-Blown Argon-Stirred Ladle
    Wei Liu
    Haiyan Tang
    Shufeng Yang
    Minghui Wang
    Jingshe Li
    Qing Liu
    Jianhui Liu
    Metallurgical and Materials Transactions B, 2018, 49 : 2681 - 2691
  • [6] Numerical Simulation of Slag Eye Formation and Slag Entrapment in a Bottom-Blown Argon-Stirred Ladle
    Liu, Wei
    Tang, Haiyan
    Yang, Shufeng
    Wang, Minghui
    Li, Jingshe
    Liu, Qing
    Liu, Jianhui
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2018, 49 (05): : 2681 - 2691
  • [7] Effect of slag layer on flow patterns in a gas stirred ladle
    Cho, S. H.
    Hong, S. H.
    Han, J. W.
    You, B. D.
    ECO-MATERIALS PROCESSING & DESIGN VII, 2006, 510-511 : 490 - 493
  • [8] Physical and CFD Modeling of the Effect of Top Layer Properties on the Formation of Open-Eye in Gas-Stirred Ladles With Single and Dual-Plugs
    Ramasetti, Eshwar Kumar
    Visuri, Ville-Valtteri
    Sulasalmi, Petri
    Palovaara, Tuomas
    Gupta, Avishek Kumar
    Fabritius, Timo
    STEEL RESEARCH INTERNATIONAL, 2019, 90 (08)
  • [9] Toward CFD Modeling of Slag Entrainment in Gas Stirred Ladles
    Huang, Ao
    Harmuth, Harald
    Doletschek, Marianne
    Vollmann, Sandra
    Feng, Xuezhi
    STEEL RESEARCH INTERNATIONAL, 2015, 86 (12) : 1447 - 1454
  • [10] Influence of the Stirring Gas in a 170-t Ladle on Mixing Phenomena - Formation and On-line Control of Open-Eye at an Industrial LD Steel Plant
    Valentin, P.
    Bruch, C.
    Kyrylenko, Y.
    Koechner, H.
    Dannert, C.
    STEEL RESEARCH INTERNATIONAL, 2009, 80 (08) : 552 - 558