Effect of Si content on separation and purification of the primary Si phase from hypereutectic Al-Si alloy using rotating magnetic field

被引:50
|
作者
Zou, Q. C. [1 ]
Jie, J. C. [2 ]
Sun, J. L. [1 ]
Wang, T. M. [1 ]
Cao, Z. Q. [1 ]
Li, T. J. [2 ]
机构
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Liaoning, Peoples R China
[2] Dalian Univ Technol, Lab Special Proc Raw Mat, Dalian 116024, Peoples R China
基金
中国国家自然科学基金;
关键词
Hypereutectic Al-Si alloys; Purification; Separation; Rotating magnetic field; Solidification; METALLURGICAL-GRADE SILICON; SOLIDIFICATION; SYSTEM; REMOVAL; MELT;
D O I
10.1016/j.seppur.2015.01.005
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Effect of Si content on separation and purification of the primary Si phase from hypereutectic Al-Si alloy using rotating magnetic field (RMF) was investigated in the present study. The results showed that the Si content has an obvious influence on the thickness of Si-rich layer formed around the sample and impurity contents in the purified Si. The thickness of Si-rich layer increases and the Si content in the Si-rich layer decreases with increasing Si content of the hypereutectic Al-Si alloy. The impurity contents of the purified Si can be reduced to a very low level. The typical metallic impurities (Fe, Ti, and Ca) have a high removal fraction. Electron probe microanalyzer (EPMA) analysis clearly reveals that the B content is lower in the primary Si phase than that in the Al-Si eutectic, suggesting the segregation of B element between the primary Si phase and the remaining liquid during solidification. In addition, the contents of B and metallic impurities (Fe, Ti and Ca) increase with increasing Si content of the Al-Si melt due to the segregation process starting at higher temperatures with higher Si content. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:101 / 107
页数:7
相关论文
共 50 条
  • [41] Effect of Sn addition on the separation and purification of primary Si from solidification of Al-30Si melt under electromagnetic stirring
    Zou, Qingchuan
    Jie, Jinchuan
    Liu, Shichao
    Sun, Xinglong
    Li, Tingju
    Wang, Tongmin
    Yin, Guomao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 725 : 1264 - 1271
  • [42] Effect of Mn and cooling rates on α-, β- and δ-Al-Fe-Si intermetallic phase formation in a secondary Al-Si alloy
    Becker, H.
    Bergh, T.
    Vullum, P. E.
    Leineweber, A.
    Li, Y.
    MATERIALIA, 2019, 5
  • [43] Growth Morphology of Nodular Primary Silicon in Hypereutectic Al-Si Alloy and Its Growth Mechanism
    Wang, Ruyao
    Lu, Weihua
    LIGHT METALS 2022, 2022, : 163 - 172
  • [44] Macrosegregation Mechanism of Primary Silicon Phase in Cast Hypereutectic Al-Si Alloys Under Alternating Electropulsing
    Zhang Limin
    Li Ning
    Zhu Longfei
    Yin Pengfei
    Wang Jianyuan
    Wu Hongjing
    ACTA METALLURGICA SINICA, 2023, 59 (12) : 1624 - 1632
  • [45] Morphologies of Primary Silicon in Hypereutectic Al-Si Alloys: Phase-Field Simulation Supported by Key Experiments
    Wang, Kai
    Wei, Ming
    Zhang, Lijun
    Du, Yong
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (04): : 1510 - 1516
  • [46] Growth kinetics of primary Si particles in hypereutectic Al-Si alloys under the influence of P inoculation: Experiments and modelling
    Xu, Yijiang
    Deng, Yun
    Casari, Daniele
    Mathiesen, Ragnvald H.
    Liu, Xiangfa
    Li, Yanjun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 854
  • [47] Refinement of Hypereutectic Al-Si Alloy by a New Al-Sc-P Master Alloy
    Zuo, Min
    Liu, Xiangfa
    JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS, 2012, 22 (01) : 64 - 69
  • [48] Effect of Electromagnetic Stirring on Morphology Evolution of Mg2Si in Hypereutectic Al-Si Alloy Composite
    Liu, Zheng
    Xu, Hong-biao
    Zhou, Zhi-peng
    Xu, He-jun
    ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3, 2012, 217-219 : 47 - +
  • [49] Effect of Pulsed Magnetic Field on Microstructure and Mechanical Properties of Eutectic Al-Si Alloy
    Zhang, L.
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2013, 44 (02): : 390 - 395
  • [50] Optimizing microstructures of hypereutectic Al-Si alloys with high Fe content via spray forming technique
    Hou, L. G.
    Cui, C.
    Zhang, J. S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (23): : 6400 - 6412