Sintered silicon nitride/nano-silicon carbide materials based on preceramic polymers and ceramic powder

被引：14

作者：

Degenhardt, Ulrich ^{[1
]}

Stegner, Frank ^{[3
]}

Liebscher, Christian ^{[2
]}

Glatzel, Uwe ^{[2
]}

Berroth, Karl ^{[3
]}

Krenkel, Walter ^{[1
]}

Motz, Guenter ^{[1
]}

机构：

[1] Univ Bayreuth, D-95440 Bayreuth, Germany

[2] Univ Bayreuth, Chair Met & Alloys, D-95440 Bayreuth, Germany

[3] FCT Ingn Keram GmbH, D-96528 Rauenstein, Germany

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2012年 / 32卷 / 09期

关键词：

Si3N4; Nano-SiC; Precursors-organic; Nanocomposites; Sintering; Microstructure-final; CRYSTALLIZATION; COMPOSITES; PRECURSORS; COATINGS; SI3N4;

D O I：

10.1016/j.jeurceramsoc.2011.09.007

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A flexible method is presented, which enables the fabrication of porous as well as dense Si3N4/nano-SiC components by using Si3N4 powder and a preceramic polymer (polycarbosilazane) as alternative ceramic forming binder. The SiCN polymer benefits consolidation as well as shaping of the green body and partially fills the interstices between the Si3N4 particles. Cross-linking of the precursor at 300 degrees C increases the mechanical stability of the green bodies and facilitates near net shape machining. At first, pyrolysis leads to porous ceramic bodies. Finally, subsequent gas pressure sintering results in dense Si3N4/nano-SiC ceramics. Due to the high ceramic yield of the polycarbosilazane binder, the shrinkage during sintering is significantly reduced from 20 to 15 lin.%. Investigations of the sintered ceramics reveal, that the microstructure of the Si3N4 ceramic contains approx. 6 vol.% nano-scaled SiC segregations, which are located both at the grain boundaries and as inclusions in the Si3N4 grains. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：1893 / 1899

页数：7

共 50 条

[11] SINTERING OF MATERIALS BASED ON SILICON CARBIDE AND SILICON NITRIDE.
Gnesin, G.G.
Soviet powder metallurgy and metal ceramics, 1984, 23 (09): : 673 - 679
[12] Thermal Conductivity of the Materials Based on Silicon Carbide and Silicon Nitride
Perevislov, S. N.
Markov, M. A.
Kuznetsov, Yu. A.
Kravchenko, I. N.
Krasikov, A. V.
RUSSIAN METALLURGY, 2020, 2020 (13): : 1477 - 1484
[13] Thermal Conductivity of the Materials Based on Silicon Carbide and Silicon Nitride
S. N. Perevislov
M. A. Markov
Yu. A. Kuznetsov
I. N. Kravchenko
A. V. Krasikov
Russian Metallurgy (Metally), 2020, 2020 : 1477 - 1484
[14] Reinforced composite materials based on silicon carbide and silicon nitride
Perevislov, S. N.
Lysenkov, A. S.
Titov, D. D.
Frolova, M. G.
Tomkovich, M. V.
FOURTH INTERDISCIPLINARY SCIENTIFIC FORUM WITH INTERNATIONAL PARTICIPATION NEW MATERIALS AND PROMISING TECHNOLOGIES, 2019, 525
[15] Artificial Ceramic Binders based on Silicon and Silicon Carbide for Silicon-Carbide Refractories in a Nitride Matrix
S. V. Zaitsev
E. A. Doroganov
V. A. Doroganov
E. I. Evtushenko
O. K. Sysa
Refractories and Industrial Ceramics, 2020, 60 : 439 - 444
[16] ARTIFICIAL CERAMIC BINDERS BASED ON SILICON AND SILICON CARBIDE FOR SILICON-CARBIDE REFRACTORIES IN A NITRIDE MATRIX
Zaitsev, S. V.
Doroganov, E. A.
Doroganov, V. A.
Evtushenko, E. I.
Sysa, O. K.
REFRACTORIES AND INDUSTRIAL CERAMICS, 2020, 60 (05) : 439 - 444
[17] WEAR-RESISTANCE OF SILICON-CARBIDE AND NITRIDE BASED CERAMIC MATERIALS
GNESIN, GG
POWDER METALLURGY AND METAL CERAMICS, 1993, 32 (05) : 381 - 385
[18] OXYGEN-FREE CERAMIC MATERIALS BASED ON SILICON-CARBIDE AND NITRIDE
GNESIN, GG
INORGANIC MATERIALS, 1993, 29 (06) : 867 - 875
[19] THE PREPARATION, CHARACTERIZATION AND USE OF BORON CONTAINING PRECERAMIC POLYMERS AS PRECURSORS TO SINTERED SILICON-CARBIDE
BURNS, GT
ZANK, GA
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1993, 205 : 369 - POLY
[20] Nano-nano composites of silicon nitride and silicon carbide
Wan, JL
Gasch, MJ
Mukherjee, AK
ULTRAFINE GRAINED MATERIALS II, 2002, : 235 - 244

← 1 2 3 4 5 →