Frequency-doubled fiber lasers for RF spectrum analysis in spectral-hole-burning media

We demonstrate an RF spectrum analyzer based on spectral-hole burning (SHB) that operates with unity probability of intercept and resolution under 100 kHz. An SHB crystal, which consists of rare-earth ions doped into a crystal host, records the power spectrum of an RF signal modulated onto an optical carrier as a series of spectral holes that persist for about 10 ms. While the crystal's homogeneous and inhomogeneous linewidths place the fundamental limits on resolution and bandwidth, respectively, the practical limits depend on the lasers used to interrogate the record stored in the crystal's absorption profile. Up to now, SHB spectrum analyzers have used chirped beams from externally modulated, stabilized lasers, which have linewidths of under 10 kHz but cannot chirp over much more than octave bandwidths, or directly modulated diode lasers, which can chirp over more than 20 GHz but have linewidths of about 1 MHz. Switching to chirped fiber lasers, which have natural linewidths of under 2 kHz and chirping linewidths on the order of 10 kHz, produces a measurement with fine resolution without any laser stabilization. In addition, by chirping the fiber laser with a sufficiently fast piezo, the resulting chirp could extend over tens of gigahertz in under 10 ms, yielding both fine resolution and broad bandwidth without extraordinary stabilization schemes.