Effects of the cutting edge microgeometry on tool wear and its thermomechanical load

被引：122

作者：

Denkena, B. ^{[1
]}

Lucas, A. ^{[1
]}

Bassett, E. ^{[1
]}

机构：

[1] Univ Hannover, Inst Prod Engn & Machine Tools IFW, D-30823 Garbsen, Germany

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2011年 / 60卷 / 01期

关键词：

Tool life; Honed cutting edge;

D O I：

10.1016/j.cirp.2011.03.098

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Tailored cutting edge micro geometries lead to a significant enhancement of the cutting tool performance and increase its tool life. This paper presents the influence of honed cutting edge geometries on the tool wear behavior, process forces and thermal load of the inserts during turning operations. Tool life maps, which show the influence of the honed cutting edge on the wear behavior, are developed for different thermomechanical load profiles of the cutting tool. Furthermore, an approach for space resolved temperature measurements near the cutting edge via two-color ratio pyrometer is presented. (C) 2011 CIRP.

引用

页码：73 / 76

页数：4

共 10 条

[1] The preparation of cutting edges using a marking laser [J].

Aurich J.C. ;

Zimmermann M. ;

Leitz L. .

Production Engineering, 2011, 5 (1) :17-24

[2] Influence of cutting edge geometry and cutting edge radius on the stability of micromilling processes [J].

Biermann D. ;

Baschin A. .

Prod. Eng., 2009, 4-5 (375-380) :375-380

[3] Surface finishes from turning and facing with round nosed tools [J].

Childs, T. H. C. ;

Sekiya, K. ;

Tezuka, R. ;

Yamane, Y. ;

Dornfeld, D. ;

Lee, D. -E. ;

Min, S. ;

Wright, P. K. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2008, 57 (01) :89-92

[4]

DENKENA B, 2005, P 5 INT C THE COAT M

[5]

DOHMEN HG, 1974, THESIS RUHRUNIVERSIT

[6]

JIVISHOV V, 2008, THESIS LEIBNIZ U HAN, P425

[7]

MERCHANT E, 1945, J APPL PHYS, V16, P267

[8]

MSAOUBI R, 2004, IM2004556 KIMAB

[9] Development of a fast fiber-optic two-color pyrometer for the temperature measurement of surfaces with varying emissivities [J].

Müller, B ;

Renz, U .

REVIEW OF SCIENTIFIC INSTRUMENTS, 2001, 72 (08) :3366-3374

[10] Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts [J].

Rech, J ;

Yen, YC ;

Schaff, MJ ;

Hamdi, H ;

Altan, T ;

Bouzakis, KD .

WEAR, 2005, 259 :1168-1176

← 1 →