Regional Hounsfield unit measurement of screw trajectory for predicting pedicle screw fixation using cortical bone trajectory: a retrospective cohort study

被引:36
|
作者
Matsukawa, Keitaro [1 ]
Abe, Yuichiro [2 ]
Yanai, Yoshihide [1 ]
Yato, Yoshiyuki [1 ]
机构
[1] Natl Hosp Org, Murayama Med Ctr, Dept Orthopaed Surg, Musashimurayama, Tokyo, Japan
[2] Wajokai Eniwa Hosp, Dept Orthopaed Surg, Eniwa, Hokkaido, Japan
关键词
Hounsfield units; Pedicle screw fixation; Screw loosening; Insertional torque; Bone density; Simulation analysis; Cortical bone trajectory; PULL-OUT STRENGTH; MINERAL DENSITY; INSERTIONAL TORQUE; IN-VITRO; STABILITY; FUSION; SPINE;
D O I
10.1007/s00701-017-3424-5
中图分类号
R74 [神经病学与精神病学];
学科分类号
摘要
Background The sufficiency of screw anchoring is a critical factor for achieving successful spinal fusion; however, no reliable method for predicting pedicle screw fixation has been established. Recently, Hounsfield units (HU) obtained from computed tomography (CT) was developed as a new reliable tool to determine the bone quality. The purpose of the present study was to demonstrate the utility of regional HU measurement of the screw trajectory to predict the primary and long-term fixation strength of pedicle screws. Method The insertional torque of pedicle screws using the cortical bone trajectory technique was measured intraoperatively in 92 consecutive patients who underwent single-level posterior lumbar interbody fusion. The cylindrical area of each screw was plotted on the preoperative CT image by precisely confirming the screw position, and the screw trajectory was measured in HU. First, three parameters: the bone mineral density (BMD) of the femoral neck and lumbar vertebrae, and regional HU values of the screw trajectory, were correlated with the insertional torque and compared among three groups. Next, pedicle screw loosening was evaluated by postoperative CT obtained 12 months after surgery, and clinical and imaging data were analyzed to assess whether regional HU values could be used as a predictor of screw loosening. Results Regional HU values of the screw trajectory (r = 0.75, p < 0.001) had stronger correlation with the insertional torque than the femoral BMD (r = 0.59, p < 0.001) and lumbar BMD (r = 0.55, p < 0.001). The incidence of screw loosening was 4.6% (16/351). Multivariate logistic regression analysis revealed that regional HU value (odds ratio = 0.70; 95% confidence interval = 0.56-0.84; p = 0.018) was an independent risk factor significantly affected screw loosening. Conclusions Regional HU values of the screw trajectory could be a strong predictor of both primary and long-term screw fixation in vivo.
引用
收藏
页码:405 / 411
页数:7
相关论文
共 50 条
  • [21] Biomechanical Evaluation of Cortical Bone Trajectory Fixation with Traditional Pedicle Screw in the Lumbar Spine: A Finite Element Study
    Su, Kuo-Chih
    Chen, Kun-Hui
    Pan, Chien-Chou
    Lee, Cheng-Hung
    APPLIED SCIENCES-BASEL, 2021, 11 (22):
  • [22] Characteristics of regional bone quality in cervical vertebrae considering BMD: Determining a safe trajectory for cervical pedicle screw fixation
    Kim, Moon-Kyu
    Cho, Ho-Jung
    Kwak, Dai-Soon
    You, Seung-Hoon
    JOURNAL OF ORTHOPAEDIC RESEARCH, 2018, 36 (01) : 217 - 223
  • [23] The Biomechanical Properties of Pedicle Screw Fixation Combined With Trajectory Bone Cement Augmentation in Osteoporotic Vertebrae
    Fan, Haitao T.
    Zhang, Renjie J.
    Shen, Cailiang L.
    Dong, Fulong L.
    Li, Yong
    Song, Peiwen W.
    Gong, Chen
    Wang, Yijin J.
    CLINICAL SPINE SURGERY, 2016, 29 (02): : 78 - 85
  • [24] Percutaneous cortical bone trajectory screw fixation versus traditional open pedicle screw fixation for type A thoracolumbar fractures without neurological deficit
    Zhangan Zheng
    Li Zhang
    Yu Zhu
    Jun Chen
    Xiaohai Zhang
    Taibao Xia
    Tianliang Wu
    Liangzhong Quan
    Guangchao Zhao
    Xuelei Ji
    Zhaoliu Gui
    Shuangtao Xue
    Zongsheng Yin
    Journal of Robotic Surgery, 2023, 17 : 233 - 241
  • [25] In Vivo Analysis of Insertional Torque During Pedicle Screwing Using Cortical Bone Trajectory Technique
    Matsukawa, Keitaro
    Yato, Yoshiyuki
    Kato, Takashi
    Imabayashi, Hideaki
    Asazuma, Takashi
    Nemoto, Koichi
    SPINE, 2014, 39 (04) : E240 - E245
  • [26] Pars and pedicle fracture and screw loosening associated with cortical bone trajectory: a case series and proposed mechanism through a cadaveric study
    Cheng, Wayne K.
    Akpolat, Yusuf T.
    Inceoglu, Serkan
    Patel, Shalin
    Danisa, Olumide A.
    SPINE JOURNAL, 2016, 16 (02) : E59 - E65
  • [27] Optimizing iliac screw fixation: a biomechanical study on screw length, trajectory, and diameter Laboratory investigation
    Santos, Edward Rainier G.
    Sembrano, Jonathan N.
    Mueller, Benjamin
    Polly, David W.
    JOURNAL OF NEUROSURGERY-SPINE, 2011, 14 (02) : 219 - 225
  • [28] Biomechanical evaluation of fixation strength among different sizes of pedicle screws using the cortical bone trajectory: what is the ideal screw size for optimal fixation?
    Keitaro Matsukawa
    Yoshiyuki Yato
    Hideaki Imabayashi
    Naobumi Hosogane
    Yuichiro Abe
    Takashi Asazuma
    Kazuhiro Chiba
    Acta Neurochirurgica, 2016, 158 : 465 - 471
  • [29] Biomechanical evaluation of fixation strength among different sizes of pedicle screws using the cortical bone trajectory: what is the ideal screw size for optimal fixation?
    Matsukawa, Keitaro
    Yato, Yoshiyuki
    Imabayashi, Hideaki
    Hosogane, Naobumi
    Abe, Yuichiro
    Asazuma, Takashi
    Chiba, Kazuhiro
    ACTA NEUROCHIRURGICA, 2016, 158 (03) : 465 - 471
  • [30] Considerations in Meta-Analysis Regarding Complications of Cortical Bone Trajectory versus Traditional Pedicle Screw Fixation
    Phan, Kevin
    Mobbs, Ralph J.
    WORLD NEUROSURGERY, 2018, 110 : 502 - 503