Measurement uncertainty evaluation by kurtosis method at calibration of electrical resistance standards using a comparator

被引：0

作者：

Zakharov, I ^{[1
,2
]}

Botsiura, O. ^{[2
]}

Semenikhin, V ^{[1
]}

机构：

[1] Natl Sci Ctr, Inst Metrol, Myronosytska Str 42, UA-61002 Kharkiv, Ukraine

[2] Kharkiv Natl Univ Radio Elect, Nauky Ave 14, UA-61166 Kharkiv, Ukraine

来源：

UKRAINIAN METROLOGICAL JOURNAL | 2020年 / 01期

关键词：

electrical resistance standard; resistance comparator; calibration; measurement uncertainty; uncertainty budget; kurtosis method; Monte-Carlo method;

D O I：

暂无

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

The article provides examples of the application of electrical resistance standards in metrological practice. Existing methods for their calibration are analyzed. It is established that calibration using a comparator is the most accurate and common method for calibrating electrical resistance standards. A model for transferring the size of the resistance unit in calibration of electrical resistance standards using a comparator is considered. An expression is given for the evaluation of the value of measurand. The procedure for estimating the expanded measurement uncertainty based on the kurtosis method is described, and the uncertainty budget is drawn up. An example of evaluation of the measurement uncertainty in calibration of the resistance coil P321 using a resistance comparator P3015 is given. The coincidence of the obtained results with those got using the Monte Carlo method is shown.

引用

页码：12 / 16

页数：5

共 50 条

[31] Numerical simulation for the determination of the measurement uncertainty for the calibration of mass standards by transfer artefacts
Lehrmann, Katharina
Haertig, Frank
Tutsch, Rainer
TM-TECHNISCHES MESSEN, 2021, 88 (02) : 90 - 102
[32] Validation of the GUM using the Monte Carlo method when applied in the calculation of the measurement uncertainty of a compact prover calibration
Castro, H. F. F.
FLOW MEASUREMENT AND INSTRUMENTATION, 2021, 77
[33] Evaluation of uncertainty of measurement in calibration of electrostatic voltmeter - A case study
Jaiswal, SK
Gupta, SR
Sridhar, L
Singh, D
JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2003, 62 (12): : 1176 - 1180
[34] Calibration and Uncertainty Evaluation of a Measurement System Using MLE: Application to a U-Bent RI POF-Sensor
Quintans Grana, Camilo
Valdes Pena, Maria Dolores
Cao y Paz, Ana Maria
Moure Rodriguez, Maria Jose
Marcos Acevedo, Jorge
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2021, 70
[35] Uncertainty Evaluation and Validation of a Comparison Methodology to Perform In-house Calibration of Platinum Resistance Thermometers using a Monte Carlo Method
A. Silva Ribeiro
J. Alves e Sousa
C. Oliveira Costa
M. Pimenta Castro
M. G. Cox
International Journal of Thermophysics, 2008, 29 : 902 - 914
[36] Evaluation of measurement uncertainty for a high-precision angle comparator with a vacuum preloaded structure
Xia, Yangqiu
Wu, Zhilin
Huang, Ming
Li, Mengyang
Tang, Qiang
MEASUREMENT SCIENCE AND TECHNOLOGY, 2020, 31 (02)
[37] Uncertainty evaluation and validation of a comparison methodology to perform in-house calibration of platinum resistance thermometers using a Monte Carlo Method
Ribeiro, A. Silva
Alves e Sousa, J.
Costa, C. Oliveira
Castro, M. Pimenta
Cox, M. G.
INTERNATIONAL JOURNAL OF THERMOPHYSICS, 2008, 29 (03) : 902 - 914
[38] On a Monte Carlo method for measurement uncertainty evaluation and its implementation
Harris, P. M.
Cox, M. G.
METROLOGIA, 2014, 51 (04) : S176 - S182
[39] Evaluation of the measurement uncertainty: Some common mistakes with a focus on the uncertainty from linear calibration
Kadis, Rouvim
JOURNAL OF CHROMATOGRAPHY A, 2017, 1499 : 226 - 229
[40] Analytical estimation of measurement uncertainty in surface plate calibration by the Moody method using differential levels
Drescher, J
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2003, 27 (03): : 323 - 332

← 1 2 3 4 5 →