Machining properties of micro EDM using electrostatic induction feeding

被引：0
作者：
Yang, Xiaodong [1 ]
Kimori, Masahito [1 ]
Kunieda, Masanori [1 ]
Sano, Sadao [1 ]
Araie, Ichiro [1 ]
机构：
[1] Harbin Inst Technol, Dept Mech Engn & Automat, Harbin 150001, Peoples R China
来源：
PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING | 2007年
关键词：
micro EDM; electrostatic induction feeding; diode; diameter of craters; capacity coupling;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The purpose of this research is to develop a micro electrical discharge machining method using electrostatic induction feeding. With this method, a pulse generator is coupled with a tool electrode by a capacity in order to reduce the minimum discharge energy per pulse eliminating the influence of the stray capacitance in the circuit. Since both straight polarity discharge and reversed polarity discharge occur alternately, the tool electrode wear is high. Hence, in this study, a diode was connected between the tool electrode and the workpiece in parallel to the working gap to make the discharge unipolar. Theoretical analysis and experimental investigation were conducted on the discharge circuit which was modified to obtain the unipolar discharge.
引用
收藏
页码：231 / 234
页数：4
相关论文
共 50 条
[41]   Research of 3D micro-EDM machining technique [J].
Kuo, CL ;
Chen, ST ;
Wu, YJE ;
Yen, ATT .
SMART ELECTRONICS AND MEMS, 1997, 3242 :157-162
[42]   Conceptualization of a Hybrid Machine Combining Laser Beam Micro Machining (LBMM) and Micro Electrical Discharge Machining (Micro-EDM) in a Single Setup [J].
Azhar, Wan Ahmad Bin Wan ;
Saleh, Tanveer .
9TH INTERNATIONAL CONFERENCE ON MECHATRONICS ENGINEERING, ICOM 2024, 2024, :316-321
[43]   Processing of Zirconium-Based Bulk Metallic Glass (BMG) Using Micro Electrical Discharge Machining (Micro-EDM) [J].
Yeo, Swee Hock ;
Tan, Peng Cheong ;
Aligiri, Erwin ;
Tor, Shu Beng ;
Loh, Ngiap Hiang .
MATERIALS AND MANUFACTURING PROCESSES, 2009, 24 (12) :1242-1248
[44]   Development of a 3D touch trigger probe using micro spherical stylus machining by micro-EDM for micro-CMM [J].
Chu, Chih-Liang ;
Chen, Yi-Lin ;
Tai, Tzu-Yao ;
Liu, Yun-Hui ;
Chuang, Cheng-Hsin ;
Lu, Chin-Tu .
SEVENTH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION, 2011, 8321
[45]   Influence of alternating side gap on micro-hole machining performances in micro-EDM [J].
Li, Zhengkai ;
Bai, Jicheng .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 94 (1-4) :979-989
[46]   Influence of alternating side gap on micro-hole machining performances in micro-EDM [J].
Zhengkai Li ;
Jicheng Bai .
The International Journal of Advanced Manufacturing Technology, 2018, 94 :979-989
[47]   An on-line monitoring system for micro electrical discharge machining (micro-EDM) process [J].
Liao, Y. S. ;
Chang, T. Y. ;
Chuang, T. J. .
PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, :235-239
[48]   Development of a micro-punching machine and study on the influence of vibration machining in micro-EDM [J].
Chern, Gwo-Lianq ;
Wu, Ying-Jeng Engin ;
Liu, Shun-Feng .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 180 (1-3) :102-109
[49]   Properties of micro-holes for nozzle by micro-EDM [J].
Cusanelli, G. ;
Minello, M. ;
Torchia, F. ;
Ammann, W. ;
Grize, P. -E. .
PROCEEDINGS OF THE 15TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2007, :241-245
[50]   Study on Fe-Based Metallic Glass Micro Hole Machining by Using Micro-EDM Combined with Electrophoretic Deposition Polishing [J].
Tsui, Hai-Ping ;
Hsu, Shih-Yu .
PROCESSES, 2022, 10 (01)
12345